R5906151 /02 XDL 119Image 9-33: Advanced Settings Menu, ColorThe Color menu will be displayed.Image 9-34: Color menu3. Select the desired value to change and confirm.4. Change the values to the desired position, taking into account the color gamut values.5. Select APPLY and click OK.9.12.2 Advanced Settings – Dual Eye Real Color correctionWhy dual eye Real Color correctionWhen using the XDL in 6P 3D mode, it is possible to do color correction on the colors for both eyes separately.While the native colors have been measured and set during factory production, it may be necessary to changethese after changes (or service actions) on the optical path.If you need to change these settings, make sure to also perform a P7 calibration, using the Projector Toolsetand a chroma meter. For more info on this topic, refer to the Projector Toolset User Guide.How to adjust the P7 Dual Eye Color1. In the main menu, navigate to System Settings → Maintenance → Advanced Settings.Image 9-35: Maintenance menu, Advanced Settings2. In the Advanced Settings menu, select Color.GUI – System Settings
