Barco XDL-4K75 User Manual

Also see for XDL-4K30: Installation manual User manual

Barco XDL-4K75 User Manual Manual pdf 84 page image

9. GUI – System SettingsWhat should be set up for an Ethernet address?Two ways can be used to assign an address:• use the Automatic setting so that an automatic address will be assigned.• Assign manually an IP address, Net-mask (subnet-mask), (default) gateway address.- Set the IP-Address field to the desired value. This must NOT be 0.0.0.0 for static IP-Address assignment. The IP addressidentifies a projector’s location on the network in the same way a street address identifies a house on a city block. Just asa street address must identify a unique residence, an IP address must be globally unique and have a uniform format.- Set the Subnet-Mask as appropriate for the local subnet.- Set the Default-Gateway to the IP-Address of the local router (MUST be on the local subnet!) on the same network as thisprojector that is used to forward traffic to destinations beyond the local network. This must not be 0.0.0.0. If there is norouter on the projector’s local subnet then just set this field to any IP-Address on the subnet.9.1.2 Wired IP address set upHow to automatically set up the IP address1. In the main menu, select System Settings → Communication → LAN.Image 9-1Communication menu, LANThe LAN menu is displayedImage 9-2LAN menu2. To enable Automatic, put the switch to the right. The color of the switch becomes blue.An automatic IP is assigned.When connected, it is indicated with the connection symbol and the indication Connected.3. Select APPLY and click OK.How to manually set up the IP address1. In the main menu, select System Settings → Communication → LAN.Image 9-3Communication menu, LAN80 R5906151 XDL 17/04/2018