OneStart

Menu

Fujitsu Eternus DX200F manuals

Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Chapter 1 Workflow
  4. Chapter 2 Checking the Server Environment
  5. Chapter 3 Notes
  6. LVM Notes
  7. Chapter 4 Checking the Server Information
  8. Chapter 5 Setting Up the ETERNUS DX
  9. Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server
  10. Setting Up the Server
  11. Maximum Number of Volume Group Settings
  12. Server Settings when CHAP Authentication is Used
  13. Server Settings when Bidirectional CHAP Authentication is Used
  14. Chapter 7 Checking Connections
  15. Multipath Configuration using PV-Links
  16. Multipath Configuration using Native Multipath
  17. Enabling ALUA (alua_enabled)
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Chapter 1 Workflow
  3. Chapter 2 Setting Up the ETERNUS DX/AF
  4. Creating the Server Accessible LUN Groups (Setting the LUN Groups)
  5. Setting the Host Responses
  6. Setting the CA Port Groups
  7. Specific Settings
  8. Setting the Subsystem Parameters
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Chapter 1 Workflow
  4. Chapter 2 Checking the Server Environment
  5. Chapter 3 Notes
  6. Fibre Channel Switch Notes
  7. LVM Notes
  8. Server Startup and Power Supply Control Notes
  9. Virtual I/O Server (VIOS) Notes
  10. Chapter 4 Checking the Server Information
  11. Chapter 5 Installing and Setting Up ETERNUSmgr
  12. Chapter 6 Setting Up the ETERNUS DX/AF
  13. Chapter 7 Setting Up the Fibre Channel Switches
  14. Chapter 8 Installing Drivers and Setting Up the Server
  15. For VIOS/VIOC Configuration
  16. Installing the Multipath Driver
  17. Chapter 9 Checking Connections
  18. Setting Logical Units
  19. Chapter 10 Setting the Multipaths
  20. Chapter 11 Creating the Volumes
  21. Creating the Logical Volumes
  22. Chapter 12 SAN Boot
  23. Chapter 13 Storage Migration
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. using this manual
  2. compliance with standards
  3. about this manual
  4. symbols used in this manual
  5. safety precautions
  6. power synchronized unit
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Chapter 1 Overview
  11. Features
  12. Specifications
  13. Components
  14. Table 1.2 Status and meanings of each LED (for power synchronized units)
  15. AC Sensor Unit (Optional)
  16. System Configuration
  17. Figure 1.6 System configuration example (power synchronization with three or more server UPS units)
  18. Power Management for Power Synchronization
  19. Figure 1.8 Operation timing chart when using a power synchronized unit (powering on)
  20. Figure 1.9 Power off using a power synchronized unit
  21. Figure 1.10 Operation timing chart when using a power synchronized unit (powering off)
  22. Chapter 2 Installation
  23. Preparation
  24. Installing in a Rack
  25. Installing a Power Synchronized Unit
  26. Installing an AC Sensor Unit
  27. Chapter 3 Powering On and Off
  28. Chapter 4 Connection and Settings
  29. Setting the ETERNUS DX/AF
  30. Figure 4.2 ETERNUS DX8700 S3/DX8900 S3 setup (Setup Power Management screen)
  31. Figure 4.3 ETERNUS DX80 S2/DX90 S2 setup (Setup Power Management screen)
  32. Figure 4.4 ETERNUS DX60 S2 setup (Setup Power Management screen)
  33. Turning on the Power Synchronized Unit
  34. Connecting Cascade Cables
  35. Connecting to the Server UPS Unit
  36. Connecting the Server UPS Unit to the Power Synchronized Unit
  37. Connecting the AC Sensor Unit
  38. Connecting to the ETERNUS DX/AF
  39. Checking after Connection
  40. Chapter 5 Adding a Connecting Device
  41. Connection Procedure When Adding an ETERNUS DX/AF
  42. Chapter 6 Operation and Maintenance
  43. Replacing a Power Synchronized Unit
  44. Troubleshooting
  45. Trouble Record
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. structure of this manual
  2. naming conventions
  3. operating environment
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Chapter 1 Screen Operations
  11. hardware components
  12. Screen Structures
  13. List Screen/Detailed Screen
  14. Basic Operation
  15. Chapter 2 System Status
  16. System (Basic Information)
  17. Network
  18. Remote Support
  19. support information
  20. AIS Connect
  21. Root Certificate
  22. Key Management
  23. Key Group
  24. Define Role
  25. Eco-mode
  26. Eco-mode Schedule Detail
  27. Event/Dump
  28. Audit Log
  29. Firmware Maintenance
  30. Storage Migration
  31. Path Group Detail Information
  32. Utility
  33. System Settings
  34. Chapter 3 Component Status
  35. Storage (Basic Information)
  36. Controller Enclosure
  37. Controller Module
  38. Performance (CM)
  39. Port Error Statistics (for the ETERNUS AF250 and the ETERNUS DX200F)
  40. Channel Adapter
  41. Performance (CA)
  42. PCIe Flash Module
  43. Performance (PCIe Flash Module)
  44. Bootup and Utility Device
  45. Power Supply Unit (CE)
  46. Battery
  47. Frontend Enclosure
  48. Frontend Router
  49. Power Supply Unit (FE)
  50. FAN Unit
  51. Operation Panel
  52. Drive Enclosure
  53. I/O Module
  54. Port Error Statistics
  55. Power Supply Unit (DE)
  56. Fan Expander Module
  57. Drives
  58. Performance (Drive)
  59. Drive Error Statistics
  60. Controller Enclosure Detail
  61. Controller Module Detail
  62. Channel Adapter Detail
  63. PCIe Flash Module Detail
  64. PSU/CPSU (CE) Detail
  65. Frontend Router Detail
  66. Service Controller Detail
  67. FE Power Supply Unit Detail
  68. FAN Unit Detail
  69. Drive Enclosure Detail
  70. I/O Module Detail
  71. Power Supply Unit (DE) Detail
  72. Fan Expander Module Detail
  73. Drive Detail
  74. Bootup and Utility Device Detail
  75. SAS Cable Detail
  76. Frontend Cable Detail
  77. Management Cable Detail
  78. Port Detail
  79. Chapter 4 Volume Status
  80. Volume (Basic Information)
  81. Performance (Host I/O)
  82. Performance (QoS)
  83. Performance (Advanced Copy)
  84. LUN Group
  85. Reservation
  86. Pinned Data
  87. Bad Sector
  88. Balancing Thin Provisioning Volume
  89. Snapshot
  90. Volume Detail (Basic)
  91. Volume Detail (Reservation)
  92. Volume Detail (Pinned Data)
  93. Volume Detail (Balancing TPV)
  94. Volume Detail (Used RAID Group)
  95. Volume Detail (Snapshot)
  96. Chapter 5 Connectivity Status
  97. Connectivity (Basic Information)
  98. Host Affinity Detail (Host Group - CA Port Group - LUN Group Setting)
  99. Host Affinity Detail (Host - CA Port - LUN Group Setting)
  100. Host Group
  101. Host Group Detail
  102. FC/FCoE Host
  103. iSCSI Host
  104. SAS Host
  105. CA Port Group
  106. FC Port
  107. iSCSI Port
  108. SAS Port
  109. FCoE Port
  111. LUN Group Detail
  112. Host Response
  113. CA Reset Group
  114. Host-LU QoS
  115. Host-LU QoS Performance Information
  116. LUN Group : LU QoS Group Detail
  117. Host QoS (Basic)
  118. iSCSI Host QoS
  119. SAS Host QoS
  120. Port QoS (Basic)
  121. iSCSI Port QoS
  122. SAS Port QoS
  123. FCoE Port QoS
  124. LU QoS Group
  125. NAS Interface
  126. Environment Settings
  127. Quota Management
  128. Meta Cache Distribution
  129. Chapter 6 RAID Group Status
  130. RAID Group (Basic Information)
  131. Tuning
  132. Eco-mode Schedule (RAID Group)
  133. SED Key Group
  134. RAID Group Detail (Basic)
  135. RAID Group Detail (Volume Layout)
  136. RAID Group Detail (Drives)
  137. Chapter 7 Thin Provisioning Pool Status
  138. Thin Provisioning Pools
  139. Thin Provisioning Pool Detail (Basic)
  140. Thin Provisioning Pool Detail (RAID Group)
  141. Thin Provisioning Pool Detail (Volume)
  142. Threshold (Thin Provisioning Pool)
  143. Eco-mode Schedule (Thin Provisioning Pool)
  144. Flexible Tier Pools
  145. Flexible Tier Pool Detail (Basic)
  146. Flexible Tier Pool Detail (Flexible Tier Sub Pool)
  147. Flexible Tier Pool Detail (Volume)
  148. Flexible Tier Sub Pool Detail (Basic)
  149. Flexible Tier Sub Pool Detail (RAID Group)
  150. Flexible Tier Sub Pool Detail (RAID Group Detail)
  151. Settings (Thin Provisioning)
  152. Chapter 8 Advanced Copy Status
  153. Advanced Copy (Basic Information)
  154. Advanced Copy (All Local Sessions)
  155. QuickOPC
  156. SnapOPC
  158. Monitor
  159. Advanced Copy (All Remote Sessions)
  160. ODX Sessions
  161. XCOPY Sessions
  162. Virtual Volume Sessions
  163. Settings (Advanced Copy)
  164. Snap Data Pool
  165. Copy Path
  166. REC Buffer
  167. REC Disk Buffer
  168. Advanced Copy (Property)
  169. Advanced Copy (Extent information)
  170. Copy Path Detail
  171. Appendix A Status List
  172. A.1.1 Storage System General Status (Detail)
  173. A.2 Volume Status
  174. A.3 RAID Group Status
  175. A.4 Thin Provisioning Pool Status
  176. A.5 Component Status
  177. A.5.1 Drive Status
  178. A.6 Key Status
  179. A.7 Key Server Status
  180. error code
  181. C.1 Advance Preparation
  182. C.2 Overview of the Procedure
  183. C.3 Checking the Connection Status Between the Host and the ETERNUS DX/AF
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. additional information
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Accessing CLI
  16. The Command Syntax
  17. Drive Syntax
  18. Flexible Tier Pool Syntax
  19. Flexible Tier Sub Pool Syntax
  20. Volume Syntax
  21. Host Syntax
  22. LUN Group Syntax
  23. Eco-mode Schedule Syntax
  24. Port Group Syntax
  25. Size of Drives and Logical Units
  26. Command Editing Hotkeys
  27. Viewing Command Help
  28. Error Message Format
  29. Slave Controller Logins
  30. Command Descriptions
  31. Chapter 2 Status Display
  32. show status
  33. show enclosure-status
  34. show fru-ce
  35. show fru-de
  36. show disks
  37. show hardware-information
  38. Chapter 3 Configuration Settings and Display
  39. show raid-groups
  40. show raid-group-progress
  41. create raid-group
  42. set raid-group
  43. delete raid-group
  44. expand raid-group
  45. Hot Spares
  46. set global-spare
  47. release global-spare
  48. set dedicated-spare
  49. release dedicated-spare
  50. Eco-mode Management
  51. show eco-mode
  52. set eco-mode
  53. show eco-schedule
  54. create eco-schedule
  55. set eco-schedule
  56. delete eco-schedule
  57. show eco-raid-group
  58. set eco-raid-group
  59. release eco-raid-group
  60. Volume Management
  61. show volumes
  62. chapter 3 configuration settings and display
  63. show volume-progress
  64. show volume-mapping
  65. create volume
  66. set volume
  67. delete volume
  68. delete all-volumes
  69. format volume
  70. expand volume
  71. show migration
  72. start migration
  73. stop migration
  74. show balancing-thin-pro-volumes
  75. start balancing-thin-pro-volume
  76. stop balancing-thin-pro-volume
  77. start zero-reclamation
  78. stop zero-reclamation
  79. show volume-qos
  80. set volume-qos
  81. Flexible Tier Volumes
  82. create flexible-tier-volume
  83. set flexible-tier-volume
  84. format flexible-tier-volume
  85. expand flexible-tier-volume
  86. delete flexible-tier-volume
  87. delete all-flexible-tier-volumes
  88. start flexible-tier-migration
  89. ODX Buffer Volume
  90. show odx-mode
  91. set odx-mode
  92. create odx-buffer-volume
  93. set odx-buffer-volume
  94. delete odx-buffer-volume
  95. Extreme Cache
  96. show extreme-cache
  97. set extreme-cache
  98. set volume-exc
  99. Thin Provisioning Pool Management
  100. show thin-provisioning
  101. set thin-provisioning
  102. show thin-pro-pools
  103. show thin-pro-pool-progress
  104. create thin-pro-pool
  105. set thin-pro-pool
  106. delete thin-pro-pool
  107. expand thin-pro-pool
  108. format thin-pro-pool
  109. Thin Provisioning Pool Eco-mode Management
  110. show eco-thin-pro-pool
  111. set eco-thin-pro-pool
  112. release eco-thin-pro-pool
  113. Flexible Tier Management
  114. show flexible-tier-mode
  115. show flexible-tier-pools
  116. show flexible-tier-pool-progress
  117. delete flexible-tier-pool
  118. show flexible-tier-sub-pools
  119. set flexible-tier-sub-pool
  120. FTRPE Migration
  121. show ftrpe-migration
  122. FTV Balancing
  123. show balancing-flexible-tier-pools
  124. start balancing-flexible-tier-pool
  125. stop balancing-flexible-tier-pool
  126. Host Interface Management
  127. Host Interface Port Parameters
  128. show fc-parameters
  129. set fc-parameters
  130. show sas-parameters
  131. set sas-parameters
  132. show iscsi-parameters
  133. set iscsi-parameters
  134. show fcoe-parameters
  135. set fcoe-parameters
  136. Host Identifiers (Host Alias)
  137. show host-wwn-names
  138. create host-wwn-name
  139. set host-wwn-name
  140. delete host-wwn-name
  141. discover host-wwn-names
  142. show host-sas-addresses
  143. create host-sas-address
  144. set host-sas-address
  145. delete host-sas-address
  146. discover host-sas-addresses
  147. show host-iscsi-names
  148. create host-iscsi-name
  149. set host-iscsi-name
  150. delete host-iscsi-name
  151. discover host-iscsi-names
  152. Mapping (When LUN Groups are Used)
  153. show host-affinity
  154. set host-affinity
  155. copy host-affinity
  156. release host-affinity
  157. Mapping (When Host Affinity Mode is Not Used)
  158. show mapping
  159. set mapping
  160. copy mapping
  161. release mapping
  162. Host Groups
  163. show host-groups
  164. create host-group
  165. set host-group
  166. delete host-group
  167. Port Groups
  168. show port-groups
  169. create port-group
  170. set port-group
  171. delete port-group
  172. LUN Groups
  173. show lun-groups
  174. create lun-group
  175. set lun-group
  176. copy lun-group
  177. delete lun-group
  178. show host-path-state
  179. set host-path-state
  180. show host-lu-qos-performance
  181. start host-lu-qos-performance
  182. stop host-lu-qos-performance
  183. Host Response
  184. show host-response
  185. set host-response
  186. delete host-response
  187. Host Sense Conversion
  188. show host-sense
  189. set host-sense
  190. delete host-sense
  191. Reset Group for Host Interface Port
  192. show ca-reset-group
  193. set ca-reset-group
  194. Ping Command for iSCSI Hosts
  195. test iscsi-ping
  196. Host LU QoS
  197. show qos-mode
  198. set qos-mode
  199. show lu-qos-groups
  200. set lu-qos-group
  201. delete lu-qos-group
  202. show host-lu-qos
  203. set host-lu-qos
  204. show qos-schedule
  205. set qos-schedule
  206. delete all-qos-setting
  207. Chapter 4 Copy Function Settings and Display
  208. SnapOPC+ Outline
  209. Copy Session Management
  210. show advanced-copy-license
  211. set advanced-copy-license
  212. delete advanced-copy-license
  213. show advanced-copy-policy
  214. set advanced-copy-policy
  215. show advanced-copy-parameters
  216. set advanced-copy-parameters
  217. show snap-data-volume
  218. initialize snap-data-volume
  219. show snap-data-pool
  220. delete snap-data-pool-volume
  221. show advanced-copy-sessions
  222. start advanced-copy
  223. stop advanced-copy
  224. Remote Equivalent Copy Management
  225. Summaries of REC Environment Settings through CLI
  226. show host-port-mode
  227. set host-port-mode
  228. show rec-path
  229. import rec-path
  230. show backup-rec-path-information
  231. export backup-rec-path
  232. convert rec-path
  233. measure rec-round-trip-time
  234. set rec-round-trip-time
  235. set rec-multiplicity
  236. show rec-buffer
  237. set rec-buffer
  238. delete rec-buffer
  239. show rec-disk-buffer
  240. create rec-disk-buffer
  241. set rec-disk-buffer
  242. delete rec-disk-buffer
  243. format rec-disk-buffer
  244. release rec-disk-buffer
  245. Chapter 5 System Settings and Display
  246. User Management
  247. show role
  248. create role
  249. set role
  250. delete role
  251. show users
  252. create user
  253. set user
  254. delete user
  255. show login-users
  256. set password
  257. initialize all-users
  258. import ssh-public-key
  259. delete ssh-public-key
  260. RADIUS Server Settings
  261. show radius
  262. set radius
  263. Network Management
  264. show network
  265. set network
  266. show firewall
  267. set firewall
  268. SNMP
  269. show snmp
  270. set snmp
  271. show snmp-manager
  272. create snmp-manager
  273. set snmp-manager
  274. delete snmp-manager
  275. show snmp-view
  276. create snmp-view
  277. set snmp-view
  278. delete snmp-view
  279. show snmp-user
  280. create snmp-user
  281. set snmp-user
  282. delete snmp-user
  283. show community-profile
  284. create community-profile
  285. set community-profile
  286. delete community-profile
  287. show snmp-trap
  288. set snmp-trap
  289. delete snmp-trap
  290. test snmp-trap
  291. export enhanced-mib
  292. E-mail Notification
  293. show email-notification
  294. set email-notification
  295. test email
  296. Event Notification
  297. show event-notification
  298. set event-notification
  299. SMI-S
  300. show smi-s
  301. set smi-s
  302. SSH/SSL Security Configuration
  303. create ssh-server-key
  304. create ssl-certificate
  305. export ssl-certificate-request
  306. import ssl-certificate
  307. AIS Connect Settings
  308. show ais-connect
  309. set ais-connect
  310. set ais-connect-remote-session
  311. test ais-connect
  312. send ais-connect-log
  313. test ais-connect-event-notification
  314. import ais-ssl-certificate
  315. System Settings
  316. show date
  317. set date
  318. show ntp
  319. set ntp
  320. ETERNUS DX Name
  321. show storage-system-name
  322. set storage-system-name
  323. Encryption Mode
  324. show encryption
  325. set encryption
  326. Box ID
  327. show boxid
  328. set boxid
  329. Power Synchronization
  330. show power-synchronization
  331. set power-synchronization
  332. Self-Encrypting Drive (SED) Authentication Settings
  333. show sed-authentication
  334. set sed-authentication
  335. Syslog Server Settings
  336. show syslog-notification
  337. set syslog-notification
  338. Audit Log Settings
  339. show audit
  340. set audit
  341. Key Management Server Linkage Function
  342. show sed-key-machine-name
  343. set sed-key-machine-name
  344. show sed-key-servers
  345. set sed-key-server
  346. import ssl-kmip-certificate
  347. show sed-key-groups
  348. create sed-key-group
  349. set sed-key-group
  350. delete sed-key-group
  351. change sed-key
  352. recover sed-key-group
  353. Shutdown/Restart System
  354. shutdown
  355. Chapter 6 Information Settings and Display
  356. show performance
  357. start performance
  358. stop performance
  359. Performance Tuning Parameters
  360. show raid-tuning
  361. set raid-tuning
  362. show cache-parameters
  363. set cache-parameters
  364. Event Log Information
  365. show events
  366. delete events
  367. Maintenance Information
  368. show remote-dir
  369. Controller Firmware
  370. show firmware-version
  371. export log
  372. Panic Dump
  373. show panic-dump
  374. export panic-dump
  375. Configuration Information
  376. show config-information
  377. export config-information
  378. Error Information
  379. show disk-error
  380. clear disk-error
  381. show port-error
  382. Bad Data Information in Volumes
  383. show bad-data-info
  384. Utility
  385. show diagnosis
  386. show led
  387. Other Notification
  388. show event-parameters
  389. set event-parameters
  390. Sub-system Parameters
  391. show subsystem-parameters
  392. set subsystem-parameters
  393. Reservations
  394. show reservation
  395. release reservation
  396. Cache Utilities
  397. show pinned-data
  398. Disk Patrol
  399. show disk-patrol
  400. set disk-patrol
  401. Chapter 7 NAS Function Setting and Display
  402. Shared Folders
  403. show nas-share
  404. create nas-share
  405. set nas-share
  406. delete nas-share
  407. Network Interface
  408. show nas-interface
  409. create nas-interface
  410. set nas-interface
  411. delete nas-interface
  412. Network Interface Bonding
  413. show nas-bonding
  414. set nas-bonding
  415. delete nas-bonding
  416. Network Interface Multipath Configuration
  417. show nas-multipath
  418. set nas-multipath
  419. delete nas-multipath
  420. Network Settings
  421. show nas-port
  422. set nas-port
  423. show nas-dns
  424. set nas-dns
  425. show nas-route
  426. set nas-route
  427. delete nas-route
  428. show nas-route6
  429. set nas-route6
  430. delete nas-route6
  431. NAS Server Configuration
  432. show nas-server
  433. set nas-server
  434. Authentication Settings
  435. show nas-ad
  436. set nas-ad
  437. show nas-ldap
  438. set nas-ldap
  439. Network Connection Testing
  440. test nas-ping
  441. test nas-ping6
  442. test nas-traceroute
  443. test nas-traceroute6
  444. File System Maintenance
  445. show nas-df
  446. show nas-fsstat
  447. show nas-fsmntstat
  448. NAS Function Restoration
  449. forced nas-fsmount
  450. forced nas-fsunmount
  451. forced nas-fsoffline
  452. forced nas-fsonline
  453. show nas-fsck
  454. start nas-fsck
  455. forced nas-fslock
  456. recover nas-engine
  457. forced online
  458. Chapter 8 CLI Original Function
  459. set clienv-force-unlock
  460. set clienv-idle-timeout
  461. logoff/logout/exit
  462. help
  463. Appendix A Error Messages/Error Codes
  464. A.2 Error Codes
  465. Appendix B List of Supported Commands
  466. B.2 List of Supported Commands (Policies)
  467. B.3 List of Supported Commands (Default Roles)
  468. Appendix C Firmware Version Support for Commands
  469. Appendix D Basic Setting Examples
  470. D.1.1 RAID Configuration Setting Procedure
  471. D.1.2 Host Access Setting Procedure
  472. D.2 Settings for Various Host Accesses
  473. D.2.1 Specifying a Host and Performing Mapping (Host Affinity Mode)
  474. D.2.2 Specifying a Port Group and Performing LUN Mapping
  475. D.3 Setting Cancellation
  476. D.3.1 Canceling Mapping
  477. D.3.3 Deleting Port Groups
  478. D.3.6 Deleting Volumes
  479. Appendix E Status List
  480. E.3 Drive Status
  481. E.5 Pool Status (TPP/FTRP/FTSP Status)
  482. E.7 Key Status
  483. E.8 Key Server Status
  484. Appendix F Default Value List
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. structure of this manual
  2. related documents
  3. naming conventions
  4. operating environment
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. list of figures
  17. system management
  18. initial setup
  19. Change User Password
  20. Set SSH Public Key
  21. System Management
  22. Modify Date and Time
  23. Change Box ID
  24. Setup Subsystem Parameters
  25. Setup Encryption Mode
  26. Setup SMI-S Environment
  27. Register SED Authentication Key
  28. Setup Power Management
  29. Setup Extreme Cache
  30. Setup Exclusive Read Cache
  31. Setup Disk Drive Patrol
  32. Setup Debug Mode
  33. Utility Management
  34. backup configuration
  35. Export Configuration
  36. Start/Stop Performance Monitoring
  37. clear cache
  38. Eco-mode Management
  39. Create Eco-mode Schedule
  40. Delete Eco-mode Schedule
  41. user management
  42. Initialize User Account
  43. Modify RADIUS
  44. Add Role
  45. delete role
  46. network management
  47. Setup Firewall
  48. Setup SNMP Agent Basic Interface
  49. Setup SNMP Manager
  50. Setup SNMP Agent MIB Access View
  51. Setup SNMP Agent User
  52. Setup SNMP Agent Community
  53. Setup SNMP Agent Trap
  54. Download MIB File
  55. Send SNMP Trap Test
  56. Display SMTP Log
  57. Setup E-Mail Notification
  58. Setup Syslog
  59. Setup SSH Server Key
  60. Create Self-signed SSL Certificate
  61. Create Key/CSR
  62. Register SSL Certificate
  63. Event/Dump Management
  64. Display/Delete Event Log
  65. Export/Delete Log
  66. Export/Delete Panic Dump
  67. Audit Log Management
  68. Disable Audit Log
  69. Setup Audit Log
  70. key management
  71. Add Key Server
  72. Delete Key Server
  73. Modify Key Server
  74. Create Key Group
  75. Delete Key Group
  76. Update SED Authentication Key
  77. Import SSL/KMIP Certificate
  78. Storage Migration Management
  79. Download Template File for Storage Migration Settings
  80. Delete Storage Migration Path
  81. Download Storage Migration Result
  82. Restart Storage Migration
  83. Suspend Storage Migration
  84. Stop Storage Migration
  85. Remote Support Management (REMCS)
  86. Setup Remote Support
  87. Update Customer Information
  88. Update Communication Environment Information
  89. Setup Log Sending Parameters
  90. Stop/Restart Remote Support
  91. Remote Support Management (AIS Connect)
  92. Setup Remote Session Permission
  93. Send Log
  94. Test Server Connectivity
  95. Send AIS Connect Test Event
  96. Import Root Certificate
  97. firmware management
  98. Delete Controller Firmware Schedule
  99. Chapter 2 Component Management
  100. assign global hot spare
  101. Release Global Hot Spare
  102. Assign Dedicated Hot Spare
  103. Release Dedicated Hot Spare
  104. Turn on Locator Beacon/Turn off Locator Beacon
  105. Add Drive Enclosure
  106. Add Channel Adapter Port
  107. NAS Recovery Management
  108. Recover NAS Engine
  109. Recover NAS System Volume
  110. Export Performance Information
  111. Clear Drive Error Statistics (All Drives)
  112. Clear Drive Error Statistics (Selected Drive)
  113. volume management
  114. create volume
  115. delete volume
  116. Rename Volume
  117. format volume
  118. expand volume
  119. Encrypt Volume
  120. TPV Management
  121. Modify Thin Provisioning Volume Threshold
  122. Optimize TPV/FTV Capacity
  123. Cancel Optimizing TPV/FTV Capacity
  124. Start Balancing Thin Provisioning Volume
  125. Stop Balancing Thin Provisioning Volume
  126. Reconfigure NAS Volume
  127. Set Allocation
  128. SDV/SDPV Management
  129. Force Delete Snap Data Pool Volume
  130. Initialize Snap Data Volume
  131. Start RAID Migration
  132. Stop RAID Migration
  133. Forbid Advanced Copy
  134. Permit Advanced Copy
  135. release reservation
  136. Modify Cache Parameters
  137. Export Cache Parameters
  139. Set ALUA
  140. Set Volume QoS
  141. Snapshot Management for NAS Volumes
  142. delete snapshot
  143. Start Snapshot
  144. stop snapshot
  145. Chapter 4 Connectivity Management
  146. Host Affinity Management
  147. Delete Host Affinity
  148. Modify Host Affinity
  149. Host Group Management
  150. Add FC/FCoE Host Group
  151. Add iSCSI Host Group
  152. Add SAS Host Group
  153. delete host group
  154. Modify Host Group (FC/FCoE)
  155. Modify Host Group (iSCSI)
  156. Modify Host Group (SAS)
  157. Add FC/FCoE Host
  158. Add iSCSI Host
  159. Add SAS Host
  160. Delete FC/FCoE Host
  161. Delete iSCSI Host
  162. Delete SAS Host
  163. Modify FC/FCoE Host
  164. Modify iSCSI Host
  165. Modify SAS Host
  166. CA Port Group Management
  167. Create iSCSI Port Group
  168. Create SAS Port Group
  169. Create FCoE Port Group
  170. Delete CA Port Group
  171. Modify FC Port Parameters
  172. Modify iSCSI Port Parameters
  173. Modify SAS Port Parameters
  174. Modify FCoE Port Parameters
  175. Modify Port Mode
  176. LUN Group Management
  177. Delete LUN Group
  178. Modify LUN Group
  179. Host Response Management
  180. Delete Host Response
  181. Modify Host Response
  182. Modify CA Reset Group
  183. Host-LU QoS Management
  184. Initialize QoS
  185. Release Host-LU QoS
  186. Start Host-LU QoS Performance Monitoring
  187. Stop Host-LU QoS Performance Monitoring
  188. Set FC/FCoE Host QoS
  189. Set iSCSI Host QoS
  190. Set SAS Host QoS
  191. Set FC Port QoS
  192. Set iSCSI Port QoS
  193. Set SAS Port QoS
  194. Set FCoE Port QoS
  195. Add LU QoS Group
  196. Delete LU QoS Group
  197. Modify LU QoS Group
  198. nas management
  199. Delete Shared Folder
  200. Modify Shared Folder
  201. Create NAS Interface
  202. Delete NAS Interface
  203. Modify NAS Interface
  204. Change NAS Server Name
  205. set dns server
  206. Set Authentication Server
  207. Add Quota Setting
  208. Delete Quota Setting
  209. Modify Quota Setting
  210. raid group management
  211. create raid group
  212. delete raid group
  213. Rename RAID Group
  214. Change Controlling CM
  215. Expand RAID Group
  216. Modify RAID Group Parameters
  217. Assign Eco-mode Schedule (RAID Group)
  218. Set Key Group (RAID Group)
  219. Recovery SED
  220. thin provisioning pool management
  221. Set Thin Provisioning
  222. Create Thin Provisioning Pool
  223. Delete Thin Provisioning Pool
  224. Rename Thin Provisioning Pool
  225. Expand Thin Provisioning Pool
  226. Format Thin Provisioning Pool (All Area)
  227. Format Thin Provisioning Pool (Unformatted Area)
  228. Modify Threshold Thin Provisioning Pool
  229. Modify Cache Parameters (Thin Provisioning Pool)
  230. Assign Eco-mode Schedule (Thin Provisioning Pool)
  231. Start Balancing Flexible Tier Pool
  232. Stop Balancing Flexible Tier Pool
  233. advanced copy management
  234. Start SnapOPC
  235. Stop Copy Session
  236. Register Advanced Copy License
  237. Delete Advanced Copy License
  238. Modify EC/OPC Priority
  239. Modify Copy Table Size
  240. Modify Copy Parameters
  241. REC Management
  242. Set Copy Path
  243. Delete All Copy Path
  244. Export All Copy Path
  245. Measure Round Trip Time
  246. Modify REC Buffer
  247. Create REC Disk Buffer
  248. Assign REC Disk Buffer
  249. Delete REC Disk Buffer
  250. Format REC Disk Buffer
  251. Modify REC Multiplicity
  252. Set REC Bandwidth Limit
  253. ODX Management
  254. Disable ODX
  255. Create ODX Buffer Volume
  256. parameter list
  257. A.1.1 Change User Password
  258. A.1.3 System Settings
  259. A.1.4 Utility Management
  260. A.1.5 Eco-mode Management
  261. A.1.6 User Management
  262. A.1.7 Network Management
  263. A.1.8 Event / Dump Management
  264. A.1.9 Audit Log Management
  265. A.1.10 Key Management
  266. A.1.11 Storage Migration Management
  267. A.1.12 Remote Support Management
  268. customer information
  269. A.1.13 Firmware Management
  270. A.2 Component Management
  271. A.3 Volume Management
  272. A.3.2 Rename Volume
  273. A.3.3 Expand Volume
  274. A.3.4 Expand Thin Provisioning Volume
  275. A.3.6 Set Allocation
  276. A.3.8 Modify Cache Parameters
  277. A.3.9 Set ALUA
  278. A.3.11 Set Snapshot
  279. A.4 Connectivity Management
  280. A.4.2 Host Group Management
  281. A.4.3 CA Port Group Management
  282. A.4.4 LUN Group Management
  283. A.4.5 Host Response Management
  284. A.4.6 Host-LU QoS Management
  285. A.4.7 NAS Management
  286. A.5 RAID Group Management
  287. A.5.2 Rename RAID Group
  288. A.5.3 Change Controlling CM
  289. A.5.5 Modify RAID Group Parameters
  290. A.5.6 Assign Eco-mode Schedule (RAID Group)
  291. A.6 Thin Provisioning Management
  292. A.6.2 Create Thin Provisioning Pool
  293. A.6.3 Rename Thin Provisioning Pool
  294. A.6.5 Modify Threshold Thin Provisioning Pool
  295. A.6.6 Modify Cache Parameters (Thin Provisioning Pool)
  296. A.7 Advanced Copy Management
  297. A.7.2 Modify EC/OPC Priority
  298. A.7.3 Modify Copy Table Size
  299. A.7.4 Modify Copy Parameters
  300. A.7.5 Set Copy Path
  301. A.7.6 Measure Round Trip Time
  302. A.7.8 Create REC Disk Buffer
  303. A.7.9 Modify REC Multiplicity
  304. A.7.10 Set REC Bandwidth Limit
  305. A.7.11 Create ODX Buffer Volume
  306. Appendix B Factory Default List
  307. B.2 Volume Management
  308. B.3 Connectivity Management
  309. B.4 RAID Group Management
  310. B.5 Thin Provisioning Management
  311. B.6 Advanced Copy Management
  312. Appendix C User Roles and Policies
  313. C.2 Availability of Functions for each Policy
  314. Appendix D Supported Functions for Each Controller Firmware Version
  315. Appendix E Naming Conventions of Volumes and Hosts
  316. E.2 Naming Convention of Hosts
  317. Appendix F Basic Size and MWC Input Condition for RAID Groups
  318. F.1.2 Basic Size when Using the Default Stripe Depth Value (For WSV Type Volumes)
  319. F.1.3 Basic Size When Stripe Depth is Tuned (For Standard, TPV, or SDPV Type Volumes)
  320. F.1.4 Basic Size When Stripe Depth is Tuned (For WSV Type Volumes)
  321. F.1.5 Basic Size When Stripe Depth is Tuned (For TPP Capacity)
  322. F.2 Input Conditions for MWC
  323. F.2.2 Allowed Input for MWC When the Stripe Depth Value is Tuned
  324. Appendix G Using RADIUS Authentication
  325. G.2 Notes when Using RADIUS Authentication for ETERNUS Web GUI
  326. G.3 Setting Up the RADIUS Server
  327. Appendix H Storage Migration Setting Files
  328. H.2 Coding Conventions for the Storage Migration Setting File
  329. H.3 Setting Example of the Storage Migration Setting File
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Chapter 1 Workflow
  3. Chapter 2 Setting Up the ETERNUS DX
  4. Creating the Server Accessible LUN Groups (Setting the LUN Groups)
  5. Setting the Host Responses
  6. Allocating LUN Groups (Setting the Host Affinity)
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. chapter 1 overview
  5. system configuration
  6. flow from installation to operation
  7. chapter 3 configuration
  8. Test
  10. Chapter 4 Operation
  11. Group
  12. Provisioning
  13. Management
  14. performance management
  15. Types
  17. Intervals
  18. Information
  19. Condition
  21. copy table size settings
  22. Copy
  23. Operation
  24. Monitoring
  25. nas management
  26. Features
  27. System
  28. Environment
  29. Volume
  30. Snapshot
  31. Stop/Start
  35. operating environment
  36. Configuration
  37. Server
  38. installation steps
  39. Interface
  41. Method
  42. Folder
  44. Name
  45. Sharing
  47. Snapshot Reference
  48. Capture
  50. Pool
  53. chapter 5 maintenance
  54. 5.1.2 Restoring Express's Manager Environment
  55. 5.1.3 Changing Express's Manager Environment
  56. 5.1.3.2 Changing IP Address
  57. 5.2 Maintenance of Express's Manager Environment
  58. 5.2.2 Restoring Express's Manager Environment
  59. 5.2.3 Changing Express's Manager Environment
  60. 5.2.3.2 Changing IP Address
  61. Stopped
  62. Function
  64. A.3.1 How SnapOPC+ Eorks
  65. A.3.2 Restore
  66. A.3.4 SDP operation
  67. Express
  68. B.1 storageadm perfdata (Performance Information Management
  69. B.2 esfsnap (Express's Manager Troubleshooting Information Collection
  70. Index
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Storage
Table of contents
  1. about this manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Chapter 1 Component Name/LED Name
  7. Rear
  8. Figure 1.4 Drives
  9. Components (Rear)
  10. Table 1.3 Status and Meanings of Each LED (Controller)
  11. Figure 1.7 Host Interface for FC Cable Connection (Installed in a Controller)
  12. Figure 1.9 Power Supply Unit
  13. Chapter 2 Basic Operation
  14. Figure 2.2 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit
  15. Powering On
  16. Powering Off
  17. Using the FUNCTION Button
  18. Chapter 3 Storage System Monitoring
  19. Displaying Status via ETERNUS CLI
  20. Event Notification
  21. Audit Log
  22. Chapter 4 Maintaining Optional Products
  23. Drive Handling Instructions
  24. Additional Drive Installation Procedure
  25. Adding Servers
  26. Volume Creation
  27. Connection Setup
  28. Chapter 5 Maintenance
  29. Check List
  30. Required Information for Inquiries
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Disk array system
Eternus DX200F first page preview

Eternus DX200F

Brand: Fujitsu | Category: Disk array system
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Chapter 1 Component Names
  6. Rear
  7. Chapter 2 Rack Installation
  8. Controller Enclosure Installation (for Regions Other than EMEA&I)
  9. Chapter 3 Checking the Configuration Environment
  10. Server Connection Preparation
  11. Driver Installation
  12. iSCSI Initiator Parameter Settings
  13. Preparing the PC Terminal for Setup
  14. LAN Connection Preparation for Operation Management
  15. LAN Related Specifications
  16. Chapter 4 Connecting Cables
  17. Power Synchronized Unit Connection
  18. Chapter 5 General Settings
  19. Figure 5.1 Example of Differential Backup Settings with SnapOPC
  20. PC Terminal Connection
  21. Powering On
  23. ETERNUS Web GUI Startup
  24. Storage Management (Initial Setup 1)
  25. LAN Cable Connection (for Operation Management)
  26. Firewall Settings
  27. RAID Configuration Settings
  28. RAID Group Creation
  29. Operation Volume Creation
  30. Generation Management Volume (SDV) Creation
  31. Temporary Work Volume (SDPV) Creation
  32. Hot Spare Registration
  33. Chapter 6 Monitoring Settings
  34. Various Notification Settings
  35. E-mail Setup
  36. Syslog Setup
  37. Remote Support Setup
  38. Remote Support (by AIS Connect) Setup
  39. Remote Support (by REMCS) Setup
  40. Audit Log Setup
  41. Monitoring Server (SNMP Manager) Settings
  42. Transmission Test Execution
  43. Send Test Mail
  44. Chapter 7 Power Control Setup
  45. Connection Setup for Power Synchronized Unit
  46. Wake On LAN Settings
  47. Chapter 8 SAN Connection Settings
  48. Host Affinity Settings
  49. CA Reset Group Settings
  50. Server Connection Setup
  51. LUN Recognition Check
  52. Disk Partition Settings
  53. Chapter 9 Advanced Copy Settings
  54. Copy Table Size Settings
  55. Copy Parameter Settings
  56. Performing a Copy (SnapOPC+)
  57. Chapter 10 System Status Check
  58. RAID Group Check
  59. Volume Check
  60. Checking Copy Sessions
  61. Checking LUNs
  62. Powering Off
  63. Chapter 11 Solution Configuration
  64. Performance/Tuning
  65. Cloud Platform
  66. VMware Linkage
  67. Microsoft Linkage
Related products
ETERNUS DX60 S2ETERNUS AF250ETERNUS AF250 S2
Fujitsu categories
Air Conditioner
Storage
Laptop
Server
Monitor
Printer
Scanner
Desktop
Motherboard
Microcontrollers
More Fujitsu categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved