OneStart

Menu

Fujitsu ETERNUS AF250 manuals

ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Table of contents
  1. operation and maintenance
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Table of contents
  1. using this manual
  2. compliance with standards
  3. about this manual
  4. symbols used in this manual
  5. safety precautions
  6. power synchronized unit
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Chapter 1 Overview
  11. Features
  12. Specifications
  13. Components
  14. Table 1.2 Status and meanings of each LED (for power synchronized units)
  15. AC Sensor Unit (Optional)
  16. System Configuration
  17. Figure 1.6 System configuration example (power synchronization with three or more server UPS units)
  18. Power Management for Power Synchronization
  19. Figure 1.8 Operation timing chart when using a power synchronized unit (powering on)
  20. Figure 1.9 Power off using a power synchronized unit
  21. Figure 1.10 Operation timing chart when using a power synchronized unit (powering off)
  22. Chapter 2 Installation
  23. Preparation
  24. Installing in a Rack
  25. Installing a Power Synchronized Unit
  26. Installing an AC Sensor Unit
  27. Chapter 3 Powering On and Off
  28. Chapter 4 Connection and Settings
  29. Setting the ETERNUS DX/AF
  30. Figure 4.2 ETERNUS DX8700 S3/DX8900 S3 setup (Setup Power Management screen)
  31. Figure 4.3 ETERNUS DX80 S2/DX90 S2 setup (Setup Power Management screen)
  32. Figure 4.4 ETERNUS DX60 S2 setup (Setup Power Management screen)
  33. Turning on the Power Synchronized Unit
  34. Connecting Cascade Cables
  35. Connecting to the Server UPS Unit
  36. Connecting the Server UPS Unit to the Power Synchronized Unit
  37. Connecting the AC Sensor Unit
  38. Connecting to the ETERNUS DX/AF
  39. Checking after Connection
  40. Chapter 5 Adding a Connecting Device
  41. Connection Procedure When Adding an ETERNUS DX/AF
  42. Chapter 6 Operation and Maintenance
  43. Replacing a Power Synchronized Unit
  44. Troubleshooting
  45. Trouble Record
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Disk array system
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Chapter 1 Component Names
  7. Rear
  8. Front
  9. Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Re gions)
  10. Figure 1.7 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
  11. Chapter 2 Rack Installation
  12. Power Distribution Unit Installation (for Regions other than the EMEIA, Central American, and Car ibbean Regions)
  13. Installing Power Distribution Unit (1U)
  14. Installing Power Distribution Unit (2U)
  15. Controller Enclosure Installation (for Regions other than the EMEIA, Central American, and Carib bean Regions)
  16. Drive Enclosure Installation (for Regions other than the EMEIA, Central American, and Caribbean Regions)
  17. Chapter 3 Checking the Configuration Environment
  18. server connection preparation
  19. driver installation
  20. iscsi initiator parameter settings
  21. preparing the pc terminal for setup
  22. lan connection preparation for operation management
  23. lan related specifications
  24. Chapter 4 Connecting Cables
  25. Drive Enclosure Connection
  26. power synchronized unit connection
  27. When No Power Distribution Units Are Installed
  28. When 1U Power Distribution Unit Is Installed (for Regions other than the EMEIA, Central American, and Carib bean Regions)
  29. When 2U Power Distribution Unit Is Installed (for Regions other than the EMEIA, Central American, and Carib bean Regions)
  30. Chapter 5 General Settings
  31. Figure 5.1 Example of Differential Backup Settings with SnapOPC
  32. Figure 5.2 Example of Creating Operation Volume and Backup Volume
  33. pc terminal connection
  34. Powering On
  35. Switching On and Off the PSU Switch on the Power Supply Unit
  37. eternus web gui startup
  38. Storage Management (Initial Setup 1)
  39. LAN Cable Connection (for Operation Management)
  40. firewall settings
  41. raid configuration settings
  42. operation volume creation
  43. Table 5.2 Operation Volume Creation
  44. Generation Management Volume (SDV) Creation
  45. Copy Data Destination Volume (SDPV) Creation
  46. hot spare registration
  47. Chapter 6 Monitoring Settings
  48. various notification settings
  49. E-mail Setup
  50. syslog setup
  51. remote support setup
  52. Remote Support (by AIS Connect) Setup
  53. Remote Support (by REMCS) Setup
  54. audit log setup
  55. Monitoring Server (SNMP Manager) Settings
  56. transmission test execution
  57. Send Test E-mail
  58. Chapter 7 Power Control Setup
  59. connection setup for power synchronized unit
  60. Chapter 8 SAN Connection Settings
  61. host affinity settings
  62. ca reset group settings
  63. server connection setup
  64. lun recognition check
  65. disk partition settings
  66. Chapter 9 Advanced Copy Settings
  67. copy table size settings
  68. copy parameter settings
  69. Performing a Copy (SnapOPC+)
  70. Chapter 10 System Status Check
  71. Checking the RAID Groups
  72. Checking the Volumes
  73. Checking the Copy Sessions
  74. powering off
  75. Chapter 11 Solution Configuration
  76. Automatic Switching Operation of the Storage Systems (Storage Cluster)
  77. Performance/Tuning
  78. Virtualization Platform
  79. vmware linkage
  80. microsoft linkage
  81. Security
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Preface
  3. Overview of Non-Stop Storage Solution
  4. Protecting Investment and Optimizing Investment Cost
  5. System Configuration
  6. Example of a Non-Stop Storage Configuration
  7. management server
  8. Example of a Non-Stop Storage Configuration (with Redundant Management Servers)
  9. Hardware Layout
  10. Workflow for System Configuration
  11. Conclusion
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Table of contents
  1. structure of this manual
  2. naming conventions
  3. operating environment
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Chapter 1 Screen Operations
  11. hardware components
  12. Screen Structures
  13. List Screen/Detailed Screen
  14. Basic Operation
  15. Chapter 2 System Status
  16. System (Basic Information)
  17. Network
  18. Remote Support
  19. support information
  20. AIS Connect
  21. Root Certificate
  22. Key Management
  23. Key Group
  24. Define Role
  25. Eco-mode
  26. Eco-mode Schedule Detail
  27. Event/Dump
  28. Audit Log
  29. Firmware Maintenance
  30. Storage Migration
  31. Path Group Detail Information
  32. Utility
  33. System Settings
  34. Chapter 3 Component Status
  35. Storage (Basic Information)
  36. Controller Enclosure
  37. Controller Module
  38. Performance (CM)
  39. Port Error Statistics (for the ETERNUS AF250 and the ETERNUS DX200F)
  40. Channel Adapter
  41. Performance (CA)
  42. PCIe Flash Module
  43. Performance (PCIe Flash Module)
  44. Bootup and Utility Device
  45. Power Supply Unit (CE)
  46. Battery
  47. Frontend Enclosure
  48. Frontend Router
  49. Power Supply Unit (FE)
  50. FAN Unit
  51. Operation Panel
  52. Drive Enclosure
  53. I/O Module
  54. Port Error Statistics
  55. Power Supply Unit (DE)
  56. Fan Expander Module
  57. Drives
  58. Performance (Drive)
  59. Drive Error Statistics
  60. Controller Enclosure Detail
  61. Controller Module Detail
  62. Channel Adapter Detail
  63. PCIe Flash Module Detail
  64. PSU/CPSU (CE) Detail
  65. Frontend Router Detail
  66. Service Controller Detail
  67. FE Power Supply Unit Detail
  68. FAN Unit Detail
  69. Drive Enclosure Detail
  70. I/O Module Detail
  71. Power Supply Unit (DE) Detail
  72. Fan Expander Module Detail
  73. Drive Detail
  74. Bootup and Utility Device Detail
  75. SAS Cable Detail
  76. Frontend Cable Detail
  77. Management Cable Detail
  78. Port Detail
  79. Chapter 4 Volume Status
  80. Volume (Basic Information)
  81. Performance (Host I/O)
  82. Performance (QoS)
  83. Performance (Advanced Copy)
  84. LUN Group
  85. Reservation
  86. Pinned Data
  87. Bad Sector
  88. Balancing Thin Provisioning Volume
  89. Snapshot
  90. Volume Detail (Basic)
  91. Volume Detail (Reservation)
  92. Volume Detail (Pinned Data)
  93. Volume Detail (Balancing TPV)
  94. Volume Detail (Used RAID Group)
  95. Volume Detail (Snapshot)
  96. Chapter 5 Connectivity Status
  97. Connectivity (Basic Information)
  98. Host Affinity Detail (Host Group - CA Port Group - LUN Group Setting)
  99. Host Affinity Detail (Host - CA Port - LUN Group Setting)
  100. Host Group
  101. Host Group Detail
  102. FC/FCoE Host
  103. iSCSI Host
  104. SAS Host
  105. CA Port Group
  106. FC Port
  107. iSCSI Port
  108. SAS Port
  109. FCoE Port
  111. LUN Group Detail
  112. Host Response
  113. CA Reset Group
  114. Host-LU QoS
  115. Host-LU QoS Performance Information
  116. LUN Group : LU QoS Group Detail
  117. Host QoS (Basic)
  118. iSCSI Host QoS
  119. SAS Host QoS
  120. Port QoS (Basic)
  121. iSCSI Port QoS
  122. SAS Port QoS
  123. FCoE Port QoS
  124. LU QoS Group
  125. NAS Interface
  126. Environment Settings
  127. Quota Management
  128. Meta Cache Distribution
  129. Chapter 6 RAID Group Status
  130. RAID Group (Basic Information)
  131. Tuning
  132. Eco-mode Schedule (RAID Group)
  133. SED Key Group
  134. RAID Group Detail (Basic)
  135. RAID Group Detail (Volume Layout)
  136. RAID Group Detail (Drives)
  137. Chapter 7 Thin Provisioning Pool Status
  138. Thin Provisioning Pools
  139. Thin Provisioning Pool Detail (Basic)
  140. Thin Provisioning Pool Detail (RAID Group)
  141. Thin Provisioning Pool Detail (Volume)
  142. Threshold (Thin Provisioning Pool)
  143. Eco-mode Schedule (Thin Provisioning Pool)
  144. Flexible Tier Pools
  145. Flexible Tier Pool Detail (Basic)
  146. Flexible Tier Pool Detail (Flexible Tier Sub Pool)
  147. Flexible Tier Pool Detail (Volume)
  148. Flexible Tier Sub Pool Detail (Basic)
  149. Flexible Tier Sub Pool Detail (RAID Group)
  150. Flexible Tier Sub Pool Detail (RAID Group Detail)
  151. Settings (Thin Provisioning)
  152. Chapter 8 Advanced Copy Status
  153. Advanced Copy (Basic Information)
  154. Advanced Copy (All Local Sessions)
  155. QuickOPC
  156. SnapOPC
  158. Monitor
  159. Advanced Copy (All Remote Sessions)
  160. ODX Sessions
  161. XCOPY Sessions
  162. Virtual Volume Sessions
  163. Settings (Advanced Copy)
  164. Snap Data Pool
  165. Copy Path
  166. REC Buffer
  167. REC Disk Buffer
  168. Advanced Copy (Property)
  169. Advanced Copy (Extent information)
  170. Copy Path Detail
  171. Appendix A Status List
  172. A.1.1 Storage System General Status (Detail)
  173. A.2 Volume Status
  174. A.3 RAID Group Status
  175. A.4 Thin Provisioning Pool Status
  176. A.5 Component Status
  177. A.5.1 Drive Status
  178. A.6 Key Status
  179. A.7 Key Server Status
  180. error code
  181. C.1 Advance Preparation
  182. C.2 Overview of the Procedure
  183. C.3 Checking the Connection Status Between the Host and the ETERNUS DX/AF
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. about this manual
  11. Function
  12. RAID Functions
  13. Figure
  18. User Capacity (Logical Capacity)
  19. RAID Group
  21. Volume
  23. Hot Spares
  24. Table 8 Hot Spare Selection Criteria
  25. Data Protection
  26. Disk Drive Patrol
  27. Redundant Copy
  28. Rebuild
  29. Fast Recovery
  30. Copyback/Copybackless
  32. Protection (Shield)
  33. Operations Optimization (Deduplication/Compression and Storage Virtualization)
  35. Table 9 Deduplication/Compression Function Specifications
  37. Table 11 Volumes That Are to Be Created depending on the Selection of "Deduplication" and "Compression
  39. Table 13 Target Deduplication/Compression Volumes of Each Function
  40. Thin Provisioning
  42. Table 17 TPP Thresholds
  43. TPV Balancing (When Allocating Disproportionate TPV Physical Capacity Evenly)
  44. TPV/FTV Capacity Optimization
  45. Flexible Tier
  46. FTV Configuration
  47. Table 21 Levels and Configurations for a RAID Group That Can Be Registered in a FTSP
  48. Table 22 FTRP Thresholds
  49. FTRP Balancing
  50. Optimization of Volume Configurations
  51. RAID Migration
  53. Logical Device Expansion
  54. LUN Concatenation
  55. LUN Concatenation (When the Concatenation Source Is a New Volume)
  56. Wide Striping
  57. Data Encryption
  58. Encryption with Self Encrypting Drive (SED)
  59. Firmware Data Encryption
  60. Key Management Server Linkage
  62. User Access Management
  63. Table 26 Available Functions for Default Roles
  64. User Authentication
  65. Audit Log
  66. Improving Host Connectivity
  67. Associating Host Groups, CA Port Groups, and LUN Groups
  68. iSCSI Security
  69. Operation Management/Device Monitoring
  70. Performance Information Management
  71. Event Notification
  72. Table 30 SNMP Specifications
  73. Device Time Synchronization
  74. Power Control
  75. Remote Power Operation (Wake On LAN)
  76. Backup (Advanced Copy)
  77. Backup
  78. Table 33 Characteristics of SnapOPC/SnapOPC+ Operations with Each Type of Copy Destination Logical Volume
  79. Figure 51 REC
  80. Figure 52 Restore OPC
  81. Figure 54 Targets for the Multi-Copy Function
  82. Figure 56 Multi-Copy (Including SnapOPC+)
  83. Figure 58 Multi-Copy (Case 1: When Performing a Cascade Copy for an REC Session in Consistency Mode)
  84. Figure 60 Cascade Copy
  85. Figure 61 Cascade Copy (Using Three Copy Sessions)
  86. Performance Tuning
  87. Assigned CMs
  88. Figure 64 QoS
  89. Host Response
  90. Storage Cluster
  91. Figure 68 Mapping TFOVs, TFO Groups, and CA Port Pairs
  92. Data Migration
  93. Non-disruptive Storage Migration
  94. Server Linkage Functions
  95. VMware Linkage
  96. Figure 73 VVOL (Operational Configuration)
  97. Figure 74 VVOL (System Configuration)
  98. Table 40 Maximum VVOL Capacity
  99. Veeam Storage Integration
  100. Table 42 Volume Types That Can Be Used with Veeam Storage Integration
  101. Microsoft Linkage
  102. OpenStack Linkage
  103. Logical Volume Manager (LVM)
  104. Smart Setup Wizard
  105. Figure 78 RAID Configuration Example (When 12 SSDs Are Installed)
  106. Connection Configuration
  107. Table 44 Ethernet Frame Capacity (Jumbo Frame Settings)
  108. Access Method
  109. Figure 81 Multipath Connection (When a SAN Connection Is Used — Basic Connection Configuration)
  110. Figure 83 Multipath Connection (When a SAN Connection Is Used — for Enhanced Performance)
  111. Remote Connections
  112. Remote Interfaces
  113. Connectable Models
  114. LAN Connection
  115. Figure 89 Connection Example without a Dedicated Remote Support Port
  116. LAN for Remote Support (RMT Port)
  117. Figure 92 Security Features
  118. Figure 93 Connection Example with a Dedicated Remote Support Port
  119. LAN Control (Master CM/Slave CM)
  120. Figure 95 LAN Control (Switching of the Master CM)
  121. Network Communication Protocols
  122. Power Supply Connection
  123. Power Synchronized Connections
  124. Figure 98 Power Supply Control Using a Power Synchronized Unit (When Connecting Three or More Servers)
  125. Power Synchronized Connections (Wake On LAN)
  126. Hardware Configurations
  127. Figure 101 Minimum Configuration Diagram: ETERNUS AF250
  128. Figure 102 Maximum Configuration Diagram: ETERNUS AF250 S2
  129. Figure 103 Maximum Configuration Diagram: ETERNUS AF250
  130. Figure 104 Enclosure Connection Path
  131. Optional Product Installation Conditions
  132. Drive Enclosures
  133. Standard Installation Rules
  134. Drive
  135. Recommended RAID Group Configurations
  136. Figure 109 Drive Combination 3
  137. Maintenance/Expansion
  138. Hot Swap/Hot Expansion (ETERNUS AF250)
  139. SSD Sanitization
  140. A. Function Specification List
  141. Target Pool for Each Function/Volume List
  142. Target Volumes of Each Function
  143. Combinations of Functions That Are Available for Simultaneous Executions
  144. Number of Processes That Can Be Executed Simultaneously
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
ETERNUS AF250 first page preview

ETERNUS AF250

Brand: Fujitsu | Category: Storage
Related products
ETERNUS AF250 S2Eternus DX200FETERNUS DX60 S2
Fujitsu categories
Air Conditioner
Storage
Laptop
Server
Monitor
Printer
Scanner
Desktop
Motherboard
Microcontrollers
More Fujitsu categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved