Fujitsu ETERNUS DX60 S3 User Manual

Also see for Eternus DX200F: Configuration guide Configuration guide Configuration guide Safety precautions Configuration guide

Contents

Chapter 4 Connectivity Management4.2 Host Group ManagementETERNUS Web GUI User’s Guide (Settings)Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ04275 Click the [Done] button to return to the [iSCSI Host] screen.End of procedure4.2.17 Modify SAS HostThis function changes the SAS host information.For details on the parameters for this function, refer to "A.4.2.12 Modify SAS Host" (page 838).The procedure to change the SAS host information is as follows:Procedure1 Select the SAS host to change the host information for, and click [Modify SAS Host] in[Action].2 Input new host information.• When no SAS hosts are registered, the [Modify SAS Host] function cannot be used.• When changing the SAS address of a SAS host that is currently being used, make sure to stop access tothat SAS host.• This function can change the following SAS host information; "Name" and "SAS Address". When the SAShost is not registered in a host group, the "Host Response" setting can also be changed.• When the SAS host is registered in a host group, use the [Modify Host Group] function to change the hostresponse. Refer to "4.2.8 Modify Host Group (SAS)" (page 399) for details.