8.2.2 LUN Recognition CheckWhen connection is completed, confirm that the server recognizes the LUN set to the ETERNUS DX.■ When Checking Using the Windows Device ManagerThe following procedure explains how to check LUN using the Windows Device Manager.1 Open [Device Manager] and expand [Disk drives].2 Confirm that the same number of "FUJITSU..." items are displayed as the number of LUNs that are set.If the example is used, eight "FUJITSU..." items are displayed.Chapter 8 SAN Connection Settings8.2 Server Connection Setup102FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)Copyright 2014 FUJITSU LIMITEDP3AM-8462-01ENZ0
