4.2 Using the Functions2014.2.7 Checking Motor Type1) Set Cn-00 to 00-04 to select the motor-type check mode.This mode is used for maintenance and is not normally used by the customer.OperationSet Cn-00 to 00-04Motor type displayedModification Index(Modification No.) displayedMotor Type DisplayMotor TypeMotor CapacityModification Index (Modification No.) DisplayHexadecimal DisplayModification index(Modification No.)0: SGM 200V1: SGM 100V2: SGMP 200V3: SGMP 100V9E: 30Wb2: 50W01: 100W02: 200W03: 300W04: 400W08: 750W4.2.8 Checking Software Version1) Set Cn-00 to 00-06 to select the software-version check mode.This mode is used for maintenance and is not normally used by the customer.OperationSet Cn-00 to 00-06Software version displayedSoftware Version DisplaySoftwareVersion4
