.USING THE DIGITAL OPERATOR4.2.2 Operation Using the Digital Operator186The following are operator-related alarms which are not recorded by alarm trace-back.Digital Operator transmission error 1Digital Operator transmission error 2• Refer to the troubleshooting procedures when an alarm occurs, described in section6.2.4.2.2 Operation Using the Digital OperatorSimple Motor CheckOperation from the Digital Operator allows the Servopack to run the motor. This allows rapidchecking of basic operations during machine set-up and testing, without the trouble of con-necting a host controller.Used during machine set-upand testing. Forward,reverse, speed settingspossible. PowerNo need to connect to hostcontroller or externalcircuits.Motor can be run just fromthe Digital Operator.1) Operation Using the Digital OperatorUse the following procedure to operate the motor from the Digital Operator1) Press DSPLSET to select the user constantsetting mode.4Setting Mode
