9-4 Maintenance and Specificationsbb ________________________• Allow the printer side vent at least 8.0" (200 mm) clearance toprevent overheating. Never insert anything into the vent.• Make sure the output tray does not overfill. Overfilling can blockmedia as it comes out and cause a printer jam.• Check the power cord and plug monthly and replace itimmediately if you find any damage.Storing the PrinterUse the following procedure when storing the printer for an extendedperiod.1. Turn off the printer. Unplug the power cord from the powersource.2. Remove all media from the multipurpose feeder. Close themultipurpose feeder and, if necessary, the top cover. Seechapter 2 for instructions.3. Store the printer and media properly.a. Store the printer and media in an area with a temperatureof 32˚ to 95˚ F (0˚ to 35˚ C) and a relative humidity of15% to 80% with no condensation.b. Store the printer and the media in the original containersor cover them to protect from dust.Moving the PrinterUse the following procedure when moving the printer.Warning! The printer weighs approximately 58.5 lbs (26.5 kg)without the toner, cassettes, and media installed.• Always have two people lift the printer.• Only lift the printer using the recessed grip areas onthe right and left sides.
