_______________________________________ Ethernet Setup 5-294. Select LPR Port; then, click New Port to bring up the Add LPRCompatible Printer window (fig. 5.24).Note: If LPR is not an option, you must log in as theAdministrator and select Control Panel: Network:Services and make sure that Microsoft TCP/IP Printingis installed. If not, click Add and select this feature.Then, restart your PC and LPR will appear as anoption for this procedure. (You may need theMicrosoft NT CD to load this service.)Fig. 5.24 Add LPR Compatible Printer Window5. Enter the printer’s TCP/IP address in the field requesting thename or address of the print server. Then enter the printername in the field below. Click Close.6. Select the General tab; then, click Print Test Page and check theprinter to see if the Windows NT Test Page printed correctly.7. Click OK. The Printer Properties window closes.8. Select File: Close. The Printers window closes.After installing and configuring the AdobePS printer driver and PPD,see “Configuring the Printer” in chapter 4 to verify that printerinterfaces are configured properly.AppleTalk Setup for EtherTalkAfter completing the AdobePS driver installation, use the followingprocedure to configure your printer for Windows NT 4.X EtherTalkprinting.
