6-28 Configurationbb ______________________________________After the job is processed, it is deleted from the spooler’s job queue.If Save Spooled Job is enabled, the job is saved to the printer’s harddisk for future use.To use Save Spooled Job, the spooler must be enabled on the printerport you are using, the spooler option must be configured in the PPD,and the printer must have a hard disk attached. Set Save Spooled Jobfrom your application Print dialog box. True enables this feature andFalse disables it.Control spooling to each printer interface independently using eitherthe Interface configuration menus or XANTÉ Command Center. Seechapter 3 (Macintosh) or 4 (PC) about configuring the PPD andusing the spooler. See “Interface Control” earlier in this chapterabout configuring the spooler on the printer’s port.Start-up PageThe Start-up Page feature prints a page listing the selected resolution,installed RAM, hard disk identities, page count, enabled interfaces, andnetwork information (if the Ethernet upgrade is installed) each time theprinter is turned on.Set Start-up Page from the MISC:STRTUP PAGE configurationmenu, from XANTÉ Command Center on a Macintosh, or bydownloading Adobe PostScript files to the printer.In the MISC:STRTUP Page menu, Yes (the factory default) enablesthe feature and No disables it. In XANTÉ’s Macintosh CommandCenter, the General: Startup Page menu allows you to turn theStart-up Page feature on or off or to print this page on demand.XANTÉ Utilities CD-ROM contains the PostScript files Startpg.onand Startpg.off. Download these files to the printer to enable(Startpg.on) or disable (Startpg.off) the feature. See “DownloadsFolder” in chapter 3 (Macintosh) and “PS_Files Folder” in chapter 4(PC) for instructions.To print a start-up page manually, take the printer off line and pressthe Test key. After the page prints, press the Online key to put theprinter back on line.
