_______________________________________ Ethernet Setup 5-55. Choose File: Quit. Command Center closes.6. Restart the Printer to make the new zone name effective.Novell NetWare ConfigurationYour printer’s Ethernet upgrade supports EtherTalk, Novell NetWareprint server, NetBEUI, and TCP/IP protocols concurrently.In a Novell network, users send print jobs to a queue on a server. Theprint server monitors these queues and submits the jobs to theappropriate network printer. Your printer can service multiple printqueues on up to four file servers.The following steps are required to set up your XANTÉ printer on aNovell network. Chapter 2 covers step 1, this section covers steps 2through 4, and chapter 3 (Macintosh) or 4 (PC) covers step 5.1. Connect your XANTÉ printer to the network through theEthernet port.2. Configure the Novell server, assigning the print server (yourprinter) access to specific queues.3. Configure the print server emulation to direct your printer topoll the appropriate Novell server(s).4. Configure the Novell print server interface on your printer.5. Install and configure the Adobe PostScript driver on theindividual workstations.Configure the Novell ServerUsing a Novell utility, your Novell System Administrator sets up andnames print servers and print queues on the Novell server. Thissection covers selecting Novell names and then configuring forNovell NetWare Version 3.X, 4.X, or 5.X.
