Protocol Tabs501This section allows users to Read and/or Write to specific 2-wire (I2C) referenceaddresses.Select the Address button to open a keypad that can used to enter the decimalreference address.Select the + or – buttons to increment or decrement the hexadecimal referenceaddress.Select the Read button to read the selected reference address current value, whichdisplays as a four-digit hexadecimal number next to the Data button.Select the Data button to open a keypad that can used to enter a user-definedhexadecimal value to be written to the reference address.Select the Page 0 to Page 4 checkbox to access the specified address for the desiredPage.Select the Write button to send the user-defined Data value to the specified referenceaddress.The user-defined hexadecimal numbers can range from 0 to FF (a leading 0 does notneed to be entered).SDH Specific TasksSDH Specific Tasks OverviewThis section includes tasks that are specific to the SDH protocol processor.For a description of specific screens and their functionality, refer to SDH - ScreenFunctions and Descriptions Overview.Please use the Contents tab and window (left side of the screen) to select, open, andview Specific Tasks for this protocol processor.• 10G WAN testing over STM-64• Configuring APS (K1 and K2) Commands• Decoding APS (K1 and K2) ValuesMPA_e_manual_D07-00-129P_RevA00
