Getting Started69When the Remote Client connects to an MPA unit within seven (7) days of TimedLicenses expiration date, a notice will appear on the Remote GUI to inform the user ofthis fact.A Timed License expires at midnight on the expiration date. At that moment, the circuitpack will revert to its previous base license. If a test is running on the unit prior tomidnight, the test will continue to run and results can be viewed, printed, etc. Nosettings changes can be made. The test can be stopped, but cannot be restarted. Whenexpired, the Timed License key will become invalid and the unit will restore thepermanent "Base License" key and operate according to the options defined by thatkey.MPA Shutdown ProcedureThis procedure describes the step by step process for shutting down a rack-mountedMPA system.When an MPA system needs to be powered down, follow the instructions below in thespecified order.Warning! Do not turn the chassis Power off or unplug the power cable without firstdeactivating the SCM-210 card (or AM4022 Processor and MCH card) and PowerSupply.1. First disconnect any remote software connections such as Remote GUI, VNC,SCPI or other software connections to the device.2. If your MPA unit has an AM4022 Processor and MCH card combination, thenpull out the Unlock/Extraction handle (to the first stop position) on the AM4022processor. If your MPA unit has an SCM-210 card, then skip to step 4.MPA_e_manual_D07-00-129P_RevA00
