GUI System Tab781To change tab names, select Changing a Tab Name for the Go To Label.Setting the Alarm Beeper StatusThis function associates a WAV file sound with an alarm event. When using the unit'stouch screen, a total of 10 sounds are available. When using the remote GUI, up to atotal of 16 sounds can be used. This includes customized WAV files that can be addedby copying the new file to the Remote Control's installation directory on your PC.To assign an audible notification to an alarm:1. From the System tab, select User Preference.2. Select Alarm Beeper Status.3. Select On or Maintenance. The Alarm Beep Definition dialog box appears.4. Select an alarm type to display the Select Alarms Sound dialog box.5. Select a sound. The sound selection uses the WAV file's name. For example,chord.wav appears as CHORD.6. If desired, select Test to hear the sound.7. Select Apply.To turn off all alarm sounds:1. Select Alarm Beeper Status.2. Select Off.To add new WAV files to the Remote Client on your PC:1. Make sure that your Remote Client application is closed.2. Place a copy of the WAV file into the Compat folder that you are running theRemote Client from.To locate the Compat folder:a. Open the RemoteClient directory. For example, the defaultdirectory is C:\Program Files\DLI\RemoteClient.b. Locate the Compat folder from which the Remote Client is running.The folder name represents the Feature Set operating on the unit. Forexample, the Compat folder for Feature Set 7.7.9 appears in theRemoteClient directory as Compat700070009.MPA_e_manual_D07-00-129P_RevA00
