Getting Started59• Save This Test Set to File: Saves the current Test Set configuration andsettings.• Restore this Test Set from File: Restores the Test Set's settings from apreviously saved settings configuration file.• Set the Protocol Mode: Changes the unit's Protocol settings. If this option isselected, the processor's protocol mode is changed (for example, from SONET toSDH).• Factory Defaults: Restores the Test Set to Factory Defaults for a specificProtocol ModeSaving a Customized Settings ConfigurationSaves a customized configuration for all protocol processors' Transmit or Receivesettings, for the selected Test Unit. For example, when a customized settingsconfiguration is saved while in a particular protocol processor mode (for example, SDH),the settings currently configured for other protocol processors (for example, OTN, etc.)will also be saved with that setting configuration.To save a configuration:1. Create a test configuration using the Transmit and Receive Settings screens.2. Once you are done, select Test Setup from the Common Function Buttons.3. Select Save This Test Set to File from the menu. The File Browser windowappears.4. Press File Name. The Enter User String keyboard appears.5. Enter a settings file name and select Enter when done.• Do not include the Space character in any file name• Do not type a file extension; the .SET file extension will automatically beadded to the filename.6. Select Drive, if you wish to save the file to a different Drive letter, such as a USBthumb drive.7. Double click on an existing directory, or click New Dir and create a new directory,if you do not wish to save the file in the default directory.8. Select OK to save the settings file.MPA_e_manual_D07-00-129P_RevA00
