GUI System Tab7776. Enter a password. Important: Password must between 4 and 8 characterslong, and can not contain and spaces.7. Select , next to the Permission field. The Select User Permissions windowappears.8. Select one of the following user permissions:• Admin: Allows the user to perform network administrator tasks such ascalibrating, adding, deleting, and updating user profiles.• Calibrate: Allows the user read and write privileges and the ability toperform calibration procedures on the unit.• Read/Write: Allows the user to read and update information.• Read: Allows the user read-only privileges.9. Select Update. The new user profile is added and appears on the User List.Deleting a User1. From the System tab, select Security.2. From the User List, select the User Name to be deleted.3. With the user name highlighted, select Delete. The user is removed from theUser List.Updating a User Profile1. From the System tab, select Security.2. From the User Name list box, select the user profile to be updated. The username, password, and permission appears in the Account Information box.3. Select , next to the field to be updated.• If Password was selected, a keypad appears, allowing you to modify thecurrent information. Press Enter when you are done.• If Permissions was selected, the Select User Permissions window appears.Select the updated permissions that you wish to apply.4. When you are done updating the user's profile, select Update. The updatedinformation appears on the User List.MPA_e_manual_D07-00-129P_RevA00
