Ublox SARA-R4 Series Command Manual

Also see for SARA-N4 Series: System integration manual

Contents

Ublox SARA-R4 Series Command Manual Manual pdf 90 page image

SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 9 Short Messages ServicePage 90 of 3079.20 Write concatenated message to memory +UCMGW+UCMGWSARA-R410M-02B SARA-R410M-52B SARA-R412MModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributesfull Yes No No < 10 s +CMS Error9.20.1 DescriptionStores one segment of a concatenated message (SMS-DELIVER or SMS-SUBMIT) to memory storage and returns the memory location of the stored message. indicates that the SMSshall be stored, while indicates aborting of the edited SMS.The command is supported only for text mode (+CMGF=1)The entered text is preceded by a ">" (Greater-Than sign) character, and this indicates that the interfaceis in "text enter" mode. The DCD signal shall be in ON state while the text is entered.9.20.2 SyntaxType Syntax Response ExampleSet AT+UCMGW=[],[toda>],[],,,,text is entered+UCMGW: OKAT+UCMGW="091137880",,,1,2,8,32767> u-blox reserves all rights to thisdocument and the informationcontained herein. Reproduction, useor disclosure to third parties withoutexpress permi+UCMGW:302OKAT+UCMGW="091137880",,,2,2,8,32767> ssion is strictly prohibited.Z>+UCMGW:303OKTest AT+UCMGW=? OK9.20.3 Defined valuesParameter Type Description String 3GPP TS 23.040 [8] TP-Destination-Address Address-Value field in string format;BCD numbers (or GSM 7 bit default alphabet characters) are converted to charactersof the currently selected TE character set (refer command +CSCS in 3GPP TS 27.007[2]); type of address given by String 3GPP TS 23.040 [8] TP-Originating-Address Address-Value field in string format;BCD numbers (or GSM 7 bit default alphabet characters) are converted to charactersof the currently selected TE character set (refer command +CSCS chapter Chapter4.10); type of address given by Number 3GPP TS 24.011 [13] TP-Originating-Address Type-of-Address octet in integer format(default refer ) Number 3GPP TS 24.011 [13] TP-Destination-Address Type-of-Address octet in integer format(when first character of is + (IRA 43) default is 145, otherwise default is 129) String Indicates the status of message in memory:• "REC UNREAD": received unread SMS messages• "REC READ": received read SMS messages• "STO UNSENT": stored unsent SMS messages• "STO SENT": stored sent SMS messages (default value) Number Sequence number of the current short message (1-255)