SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 A Appendix: Error result codesPage 260 of 307Numeric error code Description1700 GPS GPIO not configured1701 GPS GPIO ownership error1702 Invalid operation with GPS ON1703 Invalid operation with GPS OFF1704 Invalid GPS aiding mode1705 Reserved GPS aiding mode1706 GPS aiding mode already set1707 Invalid GPS trace mode1708 Parameter valid only in case of GPS OTA1709 GPS trace invalid server1710 Invalid TimeZone1711 Invalid value1712 Invalid parameter1713 Invalid operation with LOC running / GPS Busy1801 IBM busy / eCall already armed/active1802 IBM feature off / eCall feature off1803 Wrong IBM requested1804 Audio resource not available1805 ECALL restriction1806 eCall invalid dial number1900 No SAP Server Connection1901 SAP Protocol Error1902 SAP Connection failure1903 SAP Server Disconnection1904 SAP Other terminal using service1910 USECMNG import timeout expired (no input for > 20 s)1911 USECMNG import file size exceeds limit1912 USECMNG no memory available1913 USECMNG invalid certificate/key format1914 USECMNG database full1950 CDC-ECM is not available1951 CDC-ECM is busy1952 No DHCP Packets received from the DTE2000 Command timeout3000 Command aborted4000 APN configuration mismatch4001 IP type configuration mismatchA.2 Message service error result codes +CMS ERRORNumeric error code Description1 Unassigned (unallocated) number5 Delta firmware unavailable on FOTA server8 Operator determined barring10 Call barred17 Network failure21 Short message transfer rejected22 Memory capacity exceeded27 Destination out of service28 Unidentified subscriber29 Facility rejected30 Unknown Subscriber38 Network out of order41 Temporary failure42 Congestion
