SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 9 Short Messages ServicePage 67 of 3079.2.2 SyntaxType Syntax Response ExampleSet AT+CSMS= +CSMS: ,,OKAT+CSMS=1+CSMS: 1,1,1OKRead AT+CSMS? +CSMS: ,,,OK+CSMS: 0,1,1,1OKTest AT+CSMS=? +CSMS: (list of supporteds)OK+CSMS: (0-1)OK9.2.3 Defined valuesParameter Type Description Number • 0: see 3GPP TS 23.040 [8] and 3GPP TS 23.041 [9]; syntax of AT commands iscompatible with 3GPP TS 27.005 [16] phase 2; phase 2+ features may be supportedif no new command syntax is required• 1: see 3GPP TS 23.040 [8] and 3GPP TS 23.041 [9]; syntax of AT commands iscompatible with 3GPP TS 27.005 [16] phase 2+ Number Mobile terminated messages:• 0: not supported• 1: supported Number Mobile originated messages:• 0: not supported• 1: supported Number Broadcast messages:• 0: not supported• 1: supported9.2.4 NotesSARA-R4 / SARA-N4• Set to 1 to acknowledge an incoming message (either SMS or Status Report) with +CNMA ATcommand.• If is changed from 1 to 0 and one or more parameters of the +CNMI command are in phase 2+,switch the +CNMI parameters to phase 2 specific values before entering phase 2.9.3 Preferred message storage +CPMS+CPMSSARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributespartial Yes NVM No Up to 3 min +CMS Error9.3.1 DescriptionSelects memory storages , and . If the chosen storage is supported by the MT butnot suitable, the +CMS ERROR: error result code should be returned.See the test command for the supported memory types for each memory storage.9.3.2 SyntaxType Syntax Response ExampleSet AT+CPMS=[,[,]]AT+CPMS: ,,,,,OKAT+CPMS="BM","SM","SM"+CPMS: 0,5,0,50,0,50
