Ublox SARA-R4 Series Command Manual

Also see for SARA-N4 Series: System integration manual

Contents

Ublox SARA-R4 Series Command Manual Manual pdf 113 page image

SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 11 SIM managementPage 113 of 307Type Syntax Response ExampleOK OKTest AT+CLAN=? OK11.2.3 Defined valuesParameter Type Description

 String It is a two-letter abbreviation of the language. The language codes, as defined in ISO639, consists of two characters, e.g. "en", "it" etc11.3 SIM states reporting +USIMSTAT+USIMSTATSARA-R410M-02B SARA-R410M-52B SARA-R412MModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributespartial No NVM No - +CME Error11.3.1 DescriptionConfigures the +UUSIMSTAT URC presentation. Based on the configuration, the URC is able to report the SIMcard initialization status, the phonebook initialization status and the REFRESH proactive command executionresult.If  9 and 10 are reported, update all SIM card related parameters cached in the DTE's application(e.g. the IMSI retrieved with +CIMI command).11.3.2 SyntaxType Syntax Response ExampleSet AT+USIMSTAT= OK AT+USIMSTAT=3OKRead AT+USIMSTAT? +USIMSTAT: OK+USIMSTAT: 3OKTest AT+USIMSTAT=? +USIMSTAT: (list of supporteds)OK+USIMSTAT: (0-7)OKURC +UUSIMSTAT:  +UUSIMSTAT: 811.3.3 Defined valuesParameter Type Description Number Bitmask representing which indications the +UUSIMSTAT URC is allowed to report.See Table 9 for the meaning of each bit. The factory-programmed value is 0. Number • 0: SIM card not present• 1: PIN needed• 2: PIN blocked• 3: PUK blocked• 4: (U)SIM not operational• 5: (U)SIM in restricted use (FDN or BDN active)• 6: (U)SIM operational (registration may be initiated)• 7: SIM phonebook ready to be used (when the SIM application is active)• 8: USIM phonebook ready to be used (when the USIM application is active)• 9: (U)SIM toolkit REFRESH proactive command successfully concluded• 10: (U)SIM toolkit REFRESH proactive command unsuccessfully concluded• 11: PPP connection active, (U)SIM toolkit REFRESH proactive command delayed tillPPP deactivation• 12: voice call active, (U)SIM toolkit REFRESH proactive command delayed till callrelease