SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 22 GNSSPage 233 of 30722.9.2 SyntaxType Syntax Response ExampleSet AT+UGZDA= OK AT+UGZDA=1OKRead AT+UGZDA? +UGZDA: ,<$ZDA msg>OK+UGZDA: 1,$GPZDA,142351.00,12,12,2013,00,00*66OK+UGZDA: 0,NULLOKTest AT+UGZDA=? +UGZDA: (list of supporteds)OK+UGZDA: (0-1)OK22.9.3 Defined valuesParameter Type Description Number • 0 (factory-programmed value): disable the NMEA $ZDA messages• 1: enable the NMEA $ZDA messages<$ZDA msg> String NMEA $ZDA messages or "Not available" if the NMEA string is enabled, but thisinformation has not been still sent to the user.22.10 Get GNSS fix data +UGGGA+UGGGASARA-R410M-02B SARA-R410M-52BModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributesfull No NVM No < 10 s +CME Error22.10.1 DescriptionEnables/disables the storing of the last value of NMEA $GGA messages, and gets the current messaging state.If the parameter is enabled, the last value of NMEA $GGA messages can be retrieved with the readcommand even when the GNSS is switched off.The NMEA $GGA messages are volatile.22.10.2 SyntaxType Syntax Response ExampleSet AT+UGGGA= OK AT+UGGGA=1OKRead AT+UGGGA? +UGGGA: ,<$GGA msg>OK+UGGGA: 1,$GPGGA,142351.00,,,,,0,00,99.99,,,,,,*66OK+UGGGA: 0,NULLOKTest AT+UGGGA=? +UGGGA: (list of supporteds)OK+UGGGA: (0-1)OK22.10.3 Defined valuesParameter Type Description Number • 0 (factory-programmed value): to disable the NMEA $GGA messages• 1: to enable the NMEA $GGA messages
