SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 5 Mobile equipment control and statusPage 30 of 3075.3 Indicator control +CIND+CINDSARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributespartial No No No - +CME Error5.3.1 DescriptionProvides indication states related to network status, battery information and so on.The set command does not allow setting the values for those indications which are set according to modulestate (see parameter).The list of indications for set and read commands follows the indexes reported in the parameter, sothat the first corresponds to "battchg" and so on.For more details see the 3GPP TS 27.007 [2].5.3.2 SyntaxType Syntax Response ExampleSet AT+CIND=[[,[,...]]] OK AT+CIND=OKRead AT+CIND? +CIND: [,[,...]]OK+CIND: 5,0,0,0,0,0,0,0,0,0,0,0OKTest AT+CIND=? +CIND: (list of s)OK+CIND: ("battchg",(0-5)),("signal",(0-5)),("service",(0,1)),("sounder",(0,1)),("message",(0,1)),("call",(0,1)),("roam",(0,1)),("smsfull",(0,1)),("gprs",(0-2)),("callsetup",(0-3)),("callheld",(0,1)),("simind",(0-2))OK5.3.3 Defined valuesParameter Type Description Number Range of corresponding used to identify the service when an unsolicitedindication is provided String Reserved by the norm and their ranges; it may have the values:• "battchg": battery charge level (0-5)• "signal": signal quality. See mapping in the note below• "service": network service availabilityo 0: not registered to any networko 1: registered to the networko 65535: indication not available• "sounder": sounder activity, indicating when the module is generating a soundo 0: no soundo 1: sound is generated• "message": unread message available in storageo 0: no messageso 1: unread message available• "call": call in progresso 0: no call in progresso 1: call in progress• "roam": registration on a roaming networko 0: not in roaming or not registeredo 1: roamingo 65535: indication not available
