|
SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 A Appendix: Error result codesPage 264 of 307Numeric error code Description647 Lower Layer Failure From NW649 Conditional IE Error650 No Cell Allocation Available653 Re Establishment Reject654 Directed Sigconn Re Establishment656 Release of RRC connection Witout Network Activity(3G) Lower LayerFailure Downlink657 Lower Layer Failure Uplink658 Cell Barred Due To Authentication Failure659 Signalling Connection Release660 CS Connection Release Triggered By MM661 RRC Connection Establishment Failure662 RRC Connection Establsihment Reject With Redirection663 Resource Conflict664 Layer Layer Failure in Layer 2665 L2 Cause T200 Expiry N200 Plus 1 Times669 RR Connection Release Due to BAND Change (2G)670 Release of the RRC Connection Due to Out of Service in Cell_Fach (3G)671 Release of the RRC Connection Due to Not Matching PLMN in SharedNetworks(3G)672 Error Happens While Call Is Already Disconnected / Late Error674 SIM Toolkit Cannot Initiate A Call, Because MMI Is Not Registered675 SIM Toolkit Call Setup Request Is Rejected Due User Did Not Accept676 Proactive SIM Appl Terminated By User677 SIM Toolkit Originated SIM Reset (Refresh Request)680 Dial String/Number IncorrectA.3 Firmware install final result codesThe +UFWINSTALL command issues a final result code providing the result of the FW install procedure. In casethe FW install procedure fails, the error result code provides some indication about the error cause (syntaxerror or issue during the installation procedure).A.3.1 SARA-R4 / SARA-N4 final result codesNo error codes are generated.A.4 FOAT error result codesSee +UFWUPD command description.A.4.1 SARA-R4 / SARA-N4 error result codesNo error codes are generated.A.5 Internal TCP/UDP/IP stack class error codesThe following table lists all allowed error classes that can be provided by the internal TCP/UDP/IP stack through+USOER and +USOCTL (with =1) AT commands.Numericerror codeDescription Resulting from the following commands0 No error +USOCR, +USOSO, +USOGO, +USOCO,+USOWR, +USOST, +USORD, +USORF,+USOLI1 EPERM - Operation not permitted (internal error) +USOCR, +USOSO, +USOGO, +USOCO,+USOWR, +USOST, +USORD, +USORF,+USOLI
|
