SARA-R4/N4 series - AT Commands ManualUBX-17003787 - R09 9 Short Messages ServicePage 89 of 3079.19 Send concatenated message +UCMGS+UCMGSSARA-R410M-02B SARA-R410M-52BModulesSARA-N4Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributesfull Yes No No Up to 3 min (<1s for prompt ">"when present)+CMS Error9.19.1 DescriptionSends one segment of a concatenated message from a DTE to the network (SMS-SUBMIT). The messagereference value is returned to the DTE for a successful message delivery. indicates that theSMS shall be sent, while indicates aborting of the edited SMS.The command is supported only for text mode (+CMGF=1).The entered text is preceded by a ">" (Greater-Than sign) character, and this indicates that the interfaceis in "text enter" mode. The DCD signal shall be in ON state while the text is entered.9.19.2 SyntaxType Syntax Response ExampleSet AT+UCMGS=,[],,,,text is entered+UCMGS: OKAT+UCMGS="0171112233",,1,2,0,127> u-blox reserves all rights to thisdocument and the informationcontained herein. Reproduction, useor disclosure to third parties withoutexpress permis+UCMGS:2OKAT+UCMGS="0171112233",,2,2,0,127> sion is strictly prohibited.+UCMGS:3OKTest AT+UCMGS=? OK9.19.3 Defined valuesParameter Type Description String Destination address Number Type of address of - octet Number Sequence number of the current short message (1-255) Number Maximum number of short messages in the concatenated short message (1-255) Number Information Element Identifier, the possible values are the following:• 0: Concatenated short messages, 8-bit reference number• 8: Concatenated short messages, 16-bit reference number Number Concatenated short message reference number:• 0-255: Concatenated short messages, 8-bit reference number case• 0-65535: Concatenated short messages, 16-bit reference number case String SMS String Number Message reference