Menu
Siemens 6SN1123-1AA00-0DA2 Configuration Manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
05.01vii© Siemens AG 2012 All Rights ReservedSIMODRIVE 611 Configuration Manual (PJU) – 02/2012 EditionNoteRepairs may be performed only by workshops authorized by Siemens whomust use genuine spare parts. Unauthorized repairs and the use of other spareparts can result in personal injuries and property damage as well as loss of ULapprovals and safety functions, such as Safety Integrated.! WarningSIMODRIVE converters are used in high voltage installations and are operatedat voltages that when touched can cause serious injuries or death!Note the following:! WarningSiemens products may only be used for the intended use in applicationsdescribed in the catalog and the associated technical documentation. Ifthird–party products and components are used, then these must either berecommended or certified by Siemens. The perfect and safe operation ofproducts assumes that they have been correctly transported, correctly stored,located, mounted, installed, commissioned, operated and maintained. Thepermissible environmental conditions must be complied with.Information and instructions in the associated documentation must beobserved.Setup and operation of the device/equipment/system in question must only beperformed using this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Qualified personnel asreferred to in the safety instructions in this documentation are persons autho-rized to start up, ground, and label devices, systems, and circuits in accordancewith the relevant safety standards.This Configuration Manual provides all of the detailed information required touse and handle SIMODRIVE components.Should you wish for additional information or should exceptional problems arisethat are not addressed in sufficient detail in this manual, you can request therequired information from your local Siemens office.The Configuration Manual describes a modular drive system. It is permissible touse the constellations and general versions described here. All other combina-tions must be separately and individually released by Siemens.RepairsProper useDefinition:Who are qualifiedpersonnel?ObjectivesForword02.12 |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved