Menu
Siemens 6SN1123-1AA00-0DA2 Configuration Manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
2 System Configuration205.012.2 Ambient conditions2-47© Siemens AG 2012 All Rights ReservedSIMODRIVE 611 Configuration Manual (PJU) – 02/2012 EditionTable 2-2 Ambient conditionsDesignation DescriptionVibratory load Long–term storage in the transport packaging Transport in the transport packaging OperationClass 1M2 in accordance with EN60721–3–1Class 2M3 in accordance with EN60721–3–2Test values:Frequency range: 10 Hz to 56 HzWith constant 0.075 mm deflectionFrequency range: 58 Hz to 200 HzWith constant 1 g accelerationShock load Long–term storage in the transport packaging Transport in the transport packaging OperationModules/devices without drive:Modules/devices with drive:Class 1M2 in accordance with EN60721–3–1Class 2M3 in accordance with EN60721–3–2Test values:5 g/11 ms5 g/30 msProtectionagainst ingressof solid foreignbodies and water Modules with internal cooling IP201) Modules with external cooling/pipe cooling– Heatsink in cooling area IP54– Electronics area IP20Transportationand storageTemperature range –40 °C – +70 °CTransportationand storage Dew–point temper-ature td and relativeair humidity UAnnual average U = 75%td = 17 °Cdair humidity U On 30 days (24 h) annually U = 95%td = 24 °CThese days should be naturally distributed over the complete year.On the other days (<24 h)But maintaining the annualaverageU = 85%td = 24 °CRelevant Standards DIN EN 60068–2–1DIN EN 60068–2–2DIN EN 60068–2–3DIN EN 61800–5–1Ambient climaticconditions inoperationTemperature range:for PM/NE modules(100% load):Current/power der-ating from +40 °Conwards:0 °C – +55 °C+40 °C2.5 %/°CDew–point temper-ature td and relativeair humidity UAnnual average U = 75%td = 17 °Cdair humidity U On 30 days (24h) annually U = 95%td = 24 °CThese days should be naturally distributed over the complete year.On the other days (<24 h)But maintaining the annualaverageU = 85%td = 24 °CTemperaturechangeWithin one hour:Within 3 minutes:max. 10 Kmax. 1 KCondensation Not permissibleAtmospheric pres-suremin. 860 mbar (86 kPa)max. 1080 mbar (108 kPa)Gases that canhave a negative im-pact on the functionacc. to DIN 40046, Part 36 and Part 37Relevant Standards DIN EN 60068–2–1DIN EN 60068–2–2DIN EN 60068–2–3DIN EN 61800–5–11) Supplementary measure is required, if the work to be carried out close to the DC link busbar (DC link cover at the last modu-le).02.12 |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved