Menu
Siemens 6SN1123-1AA00-0DA2 Configuration Manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
305.013.4 Direct position sensing3-77© Siemens AG 2012 All Rights ReservedSIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition Encoder signal input (for encoders with current signals) at the signal amplifi-cation electronics (SVE).A 9–pin flange–mounted socket with socket contacts for standard roundencoder connectors is provided at the SVE.The input is located on the side with the PE connection.Table 3-3 Assignment of the SVE signal inputPin Signal name Function1 AP Current signal input for incremental track A2 AN Inverse current signal input for incremental track A3 P_ENCODER Encoder power supply4 M_ENCODER Encoder power supply ground5 BP Current signal input for incremental track B6 BN Inverse current signal input for incremental track B7 RP Current signal input for track R (zero mark/reference pulse)8 RN Inverse current signal input for track R(zero mark/reference pulse)9 SHIELD Ground pin to connect the inner shield Output of the SVE (connection to the SIMODRIVE controls, input at thedirect measuring system for voltage signals).A 12–pin flange–mounted socket with plug contacts for standard round en-coder connectors is provided at the SVE.Table 3-4 Assignment of the SVE signal outputPin Signal name Function1 BN Inverse voltage signal output for incremental track B2 PSENSE Remote Sense encoder power supply (P)3 RP Voltage signal input for track R (zero mark/reference pulse)4 RN Inverse voltage signal input for track R (zero mark/reference pulse)5 AP Voltage signal output for incremental track A6 AN Inverse voltage signal output for incremental track A7 – not assigned8 BP Voltage signal output for incremental track B9 – not assigned10 MENC Encoder power supply ground11 MSENSE Remote Sense encoder power supply (M)12 PENC Encoder power supplySVE pin assign-ment3 Motor Selection, Position/Speed Sensing02.12 |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved