Menu
Siemens 6SN1123-1AA00-0DA2 Configuration Manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
405.014.3 ”HLA module” control board4-109© Siemens AG 2012 All Rights ReservedSIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition X121: Axis 1 X122: Axis 2Table 4-16 Connectors X121, X122; both are 15pin sub–D socket connectorsPin X121 X122 Type1)Function1 P24RV1 P24RV2 O +24 V switched2 P24RV1 P24RV2 O +24 V switched3 P24RV1 P24RV2 O +24 V switched4 P24RV1 P24RV2 O +24 V switched5 M M Electronic ground6 USOLL1N USOLL2N O Analog setpoint output, reference ground7 USOLL1P USOLL2P O Analog setpoint output +/–10 V8 M M Electronic ground9 M24EXT M24EXT O 24 V external ground10 M24EXT M24EXT O 24 V external ground11 M24EXT M24EXT O 24 V external ground12 – – Not assigned13 M M Electronic ground14 UIST1N UIST2N I Analog valve actual–value input, referenceground15 UIST1P UIST2P I Analog valve actual–value input, +/–10 V1) I = Input, O = OutputThe analog valve actual value inputs are differential with 100 kΩ input resistance.The current ratings of the 24 V outputs of the control valves are for an ambient temperature of 40 °C 2.0 A for an ambient temperature of 55 °C 1.5 Afor the mean current value with a load cycle of 10 s duration.The temperature corner points may be interpolated linearly.The short–term current rating of the control valve outputs is 3.0 A (200 ms).In the event of an overload, the F1900 or F1901 fuse on the HLA control unitblow.The switched 24 V outputs for axes 1 and 2 are protected by F1900 (axis 1) orF1901 (axis 2) miniature fuses.Value: 2.5 AF/250 V; 5x20 mm ULFrom: Wickmann–Werke GmbHAnnenstrasse 11358453 Witten, GermanyorPostfach 252058415 WittenOrder No.: 194Modulating valveFuse4 Control Units |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved