Samsung iDCS 500 Programming Manual

Also see for iDCS 500: User guide User guide User guide Administration guide User instruction

Contents

iDCS 500 PROGRAMMINGTECHNICAL MANUAL PART 2 NOVEMBER 2001MMC: 209 ASSIGN ADD-ON MODULEDESCRIPTION:Designates to which keyset a DCS 32 button Add-On Module (AOM) or 64 buttonmodule is assigned to and determines if an off-hook voice announce (OHVA) will bereceived via a DCS 32 button AOM (AOM only). OHVAED:YES allows off-hook voiceannounce to an AOM. There is no limit to the number of DCS 32 button AOMs thatcan be assigned in the system. The maximum number of DCS 32 Button AOMs andor 64 button add-on modules that can be assigned to a keyset is 2 on a iDCS 500-Msystem and 4 for a iDCS 500-L system. A iDCS 500-M system will support amaximum of four 64 button modules per system, and thirty-two 64 button modulesfor a iDCS 500-L system.NOTE: The 64 button modules do not have a speaker or microphone so they willnot have the off-hook voice announce option.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightRELEASE Used to store data and advance to next MMCHOLD Clears previous entryACTION DISPLAY1. Press TRSF 209Display shows first AOM[301] AOM MASTERMASTER:NONE2. Dial AOM numberOR[301] AOM MASTERMASTER:NONEUse UP or DOWN to scroll through AOMnumbers and use soft keys to move cursor3a. Enter station number, e.g., 301OR[301] AOM MASTERMASTER:201Use UP or DOWN for selection of stationsORDial the number using the dial pad.