Samsung iDCS 500 Programming Manual

Also see for iDCS 500: User guide User guide User guide Administration guide User instruction

Contents

iDCS 500 PROGRAMMINGTECHNICAL MANUAL PART 2 SEPTEMBER 2003MMC: 400 CUSTOMER ON/OFF PER TRUNKDESCRIPTION:Assigns several options (listed below) on a per-trunk basis.OPTIONS0 1A2 EMULATION When this option is set to ON up to 4 internalstations can participate in a conversation onthis trunk by pressing the trunk key.1 TRUNK INC DND When this option is set to ON a trunk that isprogrammed to ring a specific station (aprivate line or DIL) will ring at that station if thestation is in DND.2 TRUNK FORWARD When this option is set to OFF this trunk willnot follow a ringing stations call forwarding.3 PASS R-CID When this option is set to ON this trunk willallow the Calling Party number from theremote node to pass through the main node tothe C.O.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 400Display show[701] TRK ON/OFF1A2 EMULATE:OFF2. Dial trunk number (e.g. 704)OR[704] TRK ON/OFF1A2 EMULATE:OFFPress UP or DOWN key to select trunkOR