OfficeServ 7100 USER INSTRUCTIONSTECHNICAL MANUAL PART 1 MAY 20091.231.17 ALARM REMINDER WITH MESSAGEStation users can have three alarms programmed at their phones. Each alarm may beone of the following three types:0. NOTSET The alarm is not set.1. TODAY ONLY The alarm will ring at the programmed time and be canceledautomatically.2. DAILY The alarm will ring each day at this time.In addition, each alarm may be accompanied by a 16 character message that will bedisplayed while the alarm is ringing.NOTE: These are the same three alarms described in Alarm Reminder. This procedureallows a message to be added. A display keyset is necessary to view messages.ACTION DISPLAY1. Press the transfer key followed by 116Display shows[201] ALM REM(1)HHMM: ¤NOTSET2. Dial 1–3 to select the alarm (e.g., 2)OR[201] ALM REM(1)HHMM: ¤NOTSETPress UP or DOWN to select the alarmPress the right soft key to move the cursor3. Enter the alarm time in 24 hour clock format(e.g., 1300)[201] ALM REM (2)HHMM:1300¤NOTSETDisplay automatically advances to step 44. Dial the valid entry from the above list for thealarm type[201] ALM REMHHMM:1300¤DAILYORPress UP or DOWN to select the alarm typePress the right soft key to move the cursor5. Enter messages using the method inProgramming Your Station’s Name[201] ALM REMTAKE MEDICATIONPress the right soft key to return to step 26. Press the transfer key to store and exit