39CUSTOMIZING YOUR KEYSETAME PASSWORDThis feature allows customers using the AME feature to enable password protec-tion. This will prevent unauthorized users from listening to your messages beingleft. The passcode is the same as your station passcode. This feature only applies ifthere is an Samsung Voicemail card installed in the system and your keyset has aprogrammed AME button.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 101 to turn on AME PASSCODE or 100 to turn it off.• Press TRANSFER to store your selection.AUTO CAMP-ONThis option allows intercom calls to be automatically camped on, if possible, whena busy station is called.• With the handset on-hook, press TRANSFER and then dial 110.• Press 081 to turn CAMP-ON on or 080 to turn it off.• Press TRANSFER to store your selection.SELECT RING TONEEach keyset user can select any one of eight ring frequencies:• While on-hook, press TRANSFER and then dial 111.• Dial 1–8 or press the UP and DOWN buttons to hear each tone.• When you hear the tone that you prefer, press TRANSFER to save it.NOTE: Specific lines or stations may be programmed to ring with a differenttone than what you have selected for your keyset.CHANGE YOUR PASSCODEFrom the factory, your station passcode is 1234.You can change your station pass-code whenever you desire.• While on-hook, press TRANSFER and then dial 101.• Dial your old passcode.• Dial a new passcode (must be four characters). You can use 0–9.• Redial the new passcode to verify. If successful, you will hear two beeps. Fourbeeps indicate an incorrect code. Reenter the code again.• Press TRANSFER to store the new passcode.NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-set or press SPEAKER button.The IN/OUT button can include an extender to indicate the specific group thatthis button will affect. This means that if you are in multiple groups, you can de-cide for which groups you will receive calls.38
