Panasonic KX-TDA0480 Installation Manual

Also see for KX-TDA0480: Getting started Getting started guide Getting started

Contents

Panasonic KX-TDA0480 Installation Manual Manual pdf 79 page image

Logical InstallationInstallation Manual 794.9 Configure UnitsOnce a Gateway or Gatekeeper unit has been created using the Unit Information Setup Wizard,the Maintenance Console Software has created a configuration file (OFDD.VHO) for the unit.This file must now be configured with data that will allow the unit to operate properly in thenetwork environment in which it is installed.The Maintenance Console Software permits all configuration file data to be entered and editedwhile off-line. Once the configuration data for one or more units has been entered into theMCS, each unit's configuration file can be saved to a hard disk and /or uploaded to unit's usingthe network interface. *1In the procedures discussed in this section, the completed configuration files will be uploadedto the units using a LAN connection.See Section 3.4 for additional information about the LAN connection.To begin the configuration process, highlight the unit to be configured by clicking on the unit'sicon and then select Edit data and Edit configuration item from the Unit menu.Note• Click the Toolbar Edit Configuration icon.*1 Additional methods for uploading and downloading configuration files are discussed in Appendix A7 of this document.