Logical InstallationInstallation Manual 55Groups PaneThe Groups pane is used to create, display, and organise IP Gateway network Groups and sub-Groups.New Groups are created by mouse-clicking on the Main directory icon and selecting New andthen Group from the Unit menu.A shortcut method to perform the same task is to click the right mouse button over the Mainicon and select New Group from the Pop-up menu.If the procedure described above is performed while an existing Group is highlighted, a sub-Group is created within the selected group.Once created, groups can be expanded and collapsed by double-clicking the left mouse-buttonover a Group or Main icon.Units PaneThe Units pane is used to create and display units (KX-TDA0480 Gateways and Gatekeepersand other) within groups and to edit unit data.A new Gateway or Gatekeeper or other unit is created using the Maintenance Console SoftwareUnit Setup Wizard. The Setup Wizard is displayed by mouse-clicking a Group in which tocreate the unit, and selecting New and then Gateway or Gatekeeper or Other on the UnitMenu. A shortcut method to perform the same task is to click the right mouse button over aGroup icon and select New Gateway from the Pop-up menu.Once a unit has been setup, its setup Information and its configuration Data can be edited bymouse-clicking on the unit and selecting Edit data and Edit configuration items on the Unitmenu.A shortcut method to edit unit data is to click the right mouse button over a unit icon and selectEdit configuration from the Pop-up menu.To sort the items shown in the units display, click on one of the field names at the top of thelist. For example, to sort the list by IP address, click the mouse cursor on the IP address field.Status LineThe status line is displayed beneath the Directory Window. It shows summary informationabout the current status of the Maintenance Console Software display.This bar can be removed and restored to the display by selecting Tool Bar from the View menu.