OperationEngine ShutdownNOTE: For additional information, see Engine Operationand Maintenance Manual.Idle the engine for 3 - 5 minutes before shutting down. Thisfew minutes of idling allows the lubricating oil and water to carryheat away from components heat-soaked by hot combustion /exhaust gases.The larger the engine, the greater the need for this idling period.Thiswillhelpavoiddamagetoturbochargersealsorlikefeaturesof an engine which, after shutdown, will no longer be cooled bythe circulation of oil and coolant.1. Place the transmission in the Neutral position.2. Apply the parking brake.3. Turn off the headlights and all accessories.4. Idle a hot engine for 2 - 5 minutes to allow theturbocharger to cool.5. Rotate the key counterclockwise to the OFF position,and remove key from the ignition switch.Emergency StartingWARNINGTo prevent property damage, personal injury,and / or death, the following procedure must beperformed exactly as outlined; otherwise, a fireor a battery explosion could result.CAUTIONTo prevent electronic component damage, neverexceed 16.0 volts to vehicle's electrical system.When it is necessary to jump-start a vehicle, themost reliable means is to connect charged 12-voltbatteries.NOTE: The International® ProStar®+ Series vehicle isequipped with a remote jump-start stud, located on the backof the battery box, which eliminates the need to remove thebattery box cover when jump-starting is required.141
