GX-Series Control Panel Installation and Setup Guide6-39Engineer 1Option 51 – ParametersThis option allows the engineer to modify the system functions. Options can be selected using the A> or keys or by entering the two digit parameter number and pressing the ent key. The selected options can thenbe programmed by using the A> key to increase or the key to decrease the values assigned to theparameter; pressing the ent key accepts the new value and returns to the previous menu level. Anyparameters that differ from this procedure are indicated in the following paragraphs. The parameters alsoprompt the engineer on which keys to press.For example, press:• 1 then 6 parameter 16 = Soak Time selected;• ent currently soak time is displayed along with the programmable range 07 (1–14) days;• 08 value of the required soak time, the display shows the new value 08 (1–14) days;• ent accept the programming and return to 16 = Soak Time displayed.NOTE: Default settings must be changed before programming in Menu Option 55 – Soak.Assigning Parameters to GroupsSeveral of the parameters allow separate values to be assigned to the groups on the system. If groups havebeen enabled, the relevant parameters prompt for a group to be selected; when selected, the value isassigned to the group parameter using the procedure outlined in the previous example.The parameters that permit group selection are indicated in the following paragraphs.Parameter Groups GX-Series Parameter Groups GX-Series01 Bell Time 39 ATM Timeout not available 02 Bell Delay 40 Not Used not available not available03 Abort Time 41 Weekend Work not available 04 Exit Time 42 PIN Change not available 05 Entry Time 43 Not Used not available not available06 System Reset 44 Early Open not available 07 Tamper Reset 45 High Security not available 08 No. Re-arms 46 Res. Select not available 09 Omit All 47 Set Confirm not available 10 Key '0' not available 48 Alarm Limits not available 11 Local Part 49 Confirm Time not available 12 Banner not available 50 Not Used not available not available13 PA Delay 51 Not Used not available not available14 KEY/SW Level not available 52 Not Used not available not available15 System Text not available 53 Not Used not available not available16 Soak Time not available 54 Keypad Access not available 17 Restart not available 55 Confirm not available 18 Stop Set not available 56 Force Restore not available 19 Part Alarm 57 Bell Extend not available 20 Power Delay 58 Power Alarm not available 21 Reset Mgr. not available 59 Part Tone not available 22 PA reset 60 Not Used not available not available23 Print Codes not available 61 Activity Mon not available 24 Exit Alarm 62 Lockout not available 25 Global Copy not available 63 Banner alerts not available 26 Forced not available 64 Set Override not available 27 cct Debounce not available 65 Reset Levels not available 28 Online print not available 66 Min Pin Size not available 29 Online level not available 67 Level Format not available 30 Video 68 Line Fail not available 31 Delay Alarm 69 Alert Inds not available 32 Show Alarms not available 70 SWDC Set Dly not available 33 Secure Code not available 71 MF BL Enable not available 34 Comfort Time not available 72 Max Alm Cause not available 35 Fail To Set 73 Guard Unset not available 36 Battery Size not available 74 Back-up Link not available 37 Standby Time not available 75 Back-up Timer not available 38 ATM Delay not available Table 6-8. System Parameters
