GX-Series Control Panel Installation and Setup Guide6-105Option 57 – System PrintThe System Print option allows the details of the system programming to be printed. There are 2 optionsfor the printer output:1 = Printer Module2 = Int RS232 1From either option, the specific details of one or all of the menu options in the following table can beselected:Menu Option Menu No.01 System Data 2302 Codes 4203 Parameters 5104 Zones 5205 Outputs 5306 Links 5407 Communication 5608 ISDN 56.309 Groups 6310 Keypads 5811 Timers 6512 Event Log 2213 All (items 1-11)Table 6-25. System Print OptionsSelecting a Print OptionThe required print option is selected by entering the option number 01 – 12 or by using the A> and keysand then pressing ent. When printing option 11 = EVENT LOG, the system prompts for Groups to beselected; the print shows only those events logged for the groups selected. The print can be aborted at anytime by pressing the esc key.NOTE: A serial printer on line must be connected to communication line 1 of the GX-Series before the printoption is selected. If the printer is off-line or is not connected, the PRINTER off-line / ESC to abortmessage is displayed. Press the ESC key and correct the problem.Printing TimersPrinting 10 = Timers gives details of all the times that have been assigned in option 65 = TIMERS; thisincludes the autoset time, the pre-warning period and lockout times.
