Using Proximity WaypointsUse the Proximity Waypoints Page to define an alarmcircle around a stored waypoint location.Proximityicon Empty lineProximityAlarmscheck boxRadiusfieldTo add a proximity waypoint:1. Press MENU twice to open the Main Menu.2. Highlight the Proximity icon, and pressENTER to open the Proximity Waypoints Page.3. Highlight an empty line, and press ENTER toopen the Find Menu.4. Select a waypoint from the Waypoints List or fromany other group of map points, and press ENTERto open the information page for the item.5. With the Use button highlighted, press ENTERto add the point to the list on the ProximityWaypoints Page.6. Use the ROCKER to highlight and adjustthe Radius field if you want to enter a valuedifferent than the default of 1 mile.To select alarm tones and turn proximityalarms on or off:1. To select an alarm tone, select the ProximityAlarm Tones button and press ENTER toopen the Proximity Alarm Tones Setup Page.2. Highlight each alarm field and press ENTER toview the list of tones.3. Select a tone from the list and press ENTER.4. Activate the alarms byplacing a check in the boxat the bottom of the page.Speed alerts are proximitypoints obtained fromservices provided by usingthe optional POI Loader.(see page 25)GPSMAP 60Cx Owner’s Manual bAsIc oPerAtIon > usIng ProxIMIty wAyPoInts
