GPSMAP 3206/3210 Owner’s Manual 6MaIn Menu > sYsteM tabM aInM enuUse the Advanced NMEA Setup Page to turn the GPS status (GSA, GSV),Waypoint/Route (WPL, RTE), and the Garmin proprietary sentences on or off.Check any other equipment’s owners manual to see what sentences are requiredto be enabled for functionality.lat/lon Minutes Precision allows you to adjust the number of digits to the rightof the decimal point for transmission of NMEA Output, either 2, 3, or 4 digits.Use the Waypoint ID setting to output the waypoint identifiers as names ornumbers.Advanced NMEA Setup PageTo change Advanced NMEA settings:1. Press the NMEA Setup soft key to open the Advanced NMEA Setup Page.2. To change, enable, or disable NMEA output sentences, highlight thesentence, and press ENTER to select or clear the check box. Only selectedsentences are output.Update Sub TabThe Update sub tab shows the status of any software you are uploading to yourunit.Update—updates software on your unit.Prepare Card—updates software for devices on the Garmin MarineNetwork. When selected, information about your network installation iscollected and saved to a data card. Use the data card with Marine Updateron your personal computer to download software updates for yoursystem. Using Marine Updater, you can put all of the software updates on adata card. When you put the data card into the unit it will updatethe software for all devices on the network. Check the Garmin Web site(www.garmin.com) for future updates and announcements.••
