22 GPSMAP 3206/3210 Owner’s ManualbasIc oPeratIon > navIgatIng to a destInatIonbasIcoperatIonTo Go To a new map point (non-map item) from the map display:1. Use the ROCKER to move the pointer to the location you want, and pressNAV.2. With Go To MAP Point highlighted, press ENTER.To stop navigation:1. Press NAV.2. Highlight Stop Navigation, and press ENTER.Follow Track and TracBack NavigationA track is an electronic breadcrumb trail recording or history of your path. Thetrack currently being recorded is the “active” track. An active track can be storedor saved in the unit. Both the Follow Track and TracBack options navigate inthe same way. Follow Track uses stored or “saved” tracks; TracBack uses yourcurrent or “active” track.TracBack allows you to retrace your path using the track log stored in thereceiver’s memory, which eliminates the need to store waypoints along the way.TracBack routes are created by reducing your track log into a route and activatingan inverted route. When active, a TracBack route leads you through your storedtrack log points, so it is a good idea to clear the existing track log before you startyour current trip.To clear the track log:1. Press and hold ADJ/MENU to open the Main Menu.2. Using the ROCKER, highlight the Tracks tab, and then highlight the Activesub tab.3. Press the Clear soft key. A confirmation message appears.4. Press the OK soft key to clear the track log.Clear soft key
