Garmin GPSMAP 3206 Owner's Manual

Also see for GPSMAP 3206 - Marine GPS Receiver: Installation instructions Install guide Installation instructions Important safety information Quick reference guide

Contents

Garmin GPSMAP 3206 Owner's Manual Manual pdf 27 page image

GPSMAP 3206/3210 Owner’s Manual 1basIc oPeratIon > revIewIng and edItIng waYPoIntsbasIcoperatIonUser WaypointsThe User sub tab on the Points tab shows a master list of all waypoints currentlystored in memory. From the User sub tab, you can review, edit, rename, or deleteindividual waypoints, or delete all user waypoints. The number of available andused waypoints are shown at the bottom of the User sub tab. Stored waypoints arearranged in alphanumeric order.To scroll through and review the waypoint list:1. Use the ROCKER to highlight the Points tab on the Main Menu, and thenhighlight the User sub tab.2. Press up or down on the ROCKER to scroll through the list of waypoints;press right or left on the ROCKER to scroll by page.3. Press ENTER to review the highlighted waypoint on the Review WaypointPage. See page 16 for information on reviewing and editing waypoints.4. Press the Next soft key to return to the waypoint list. The next waypoint inthe list is automatically highlighted.Deleting WaypointsThe following soft keys are available when you highlight a waypoint on the Usersub tab:New Waypoint—creates a new waypoint.Delete—deletes the selected waypoint from the list and any from route inwhich the waypoint was used.Del by Smbl—deletes waypoints that use the same symbol.Delete All—deletes all waypoints from the unit.NOTE: When you delete a waypoint from the list, it cannot be recovered fromthe unit. Save important waypoints to a data card, or write them down.••••To delete a single waypoint from the User sub tab:1. Use the ROCKER to highlight the waypoint you want to delete, and thenpress the Delete Waypoint soft key. A confirmation message appears.2. Press the OK soft key to delete the selected waypoint.To delete waypoints by symbol:1. On the User sub tab, highlight the waypoint you want to delete.2. Press the Delete By Symbol soft key.3. Use the ROCKER to highlight the symbol of the waypoints you want todelete, and press ENTER.4. Press the OK soft key to delete the waypoints by symbol. Otherwise, pressthe Cancel soft key to return to the User sub tab without deleting anywaypoints.To delete all user waypoints:1. On the User sub tab, press the Delete All soft key.2. Highlight OK, and press ENTER to delete all user waypoints.