Garmin GPSMAP 3206 Owner's Manual

Also see for GPSMAP 3206 - Marine GPS Receiver: Installation instructions Install guide Installation instructions Important safety information Quick reference guide

Contents

Garmin GPSMAP 3206 Owner's Manual Manual pdf 19 page image

GPSMAP 3206/3210 Owner’s Manual 11basIc oPeratIon > usIng the gPsMaP 3206/3210basIcoperatIon3. Press right on the ROCKER to move to the next character on the lineor press left to move back to the previous character. Press left on theROCKER from the first character position to clear the field. If there aremore than two lines of data, keep pressing right on the ROCKER to go tothe next line.4. Press ENTER to accept data and move to the next programmable field.Not all data fields are programmable. When moving about a page with thesefields, the highlight skips them.Using Additional Map DataThe GPSMAP 3206/3210 comes preloaded with the latest Marine DetailCharts of the United States coastline (including Alaska and Hawaii) usingBlueChart® g2™ technology. This cartography features integrated mapping, 2-Dor 3-D map perspective, tide and current data, improved IALA symbols, navaids,marinas, boat ramps, roads, and more.With optional preprogrammed BlueChart g2 Garmin data cards, you can accessadditional data including highly detailed coastal roads and points of interest suchas restaurants, lodging, local attractions and more. Full-color aerial photographsof ports, marinas, bridges, and navigational landmarks are also included on manypreprogrammed BlueChart g2 data cards.See your Garmin dealer or visit the Garmin Web site (www.garmin.com) formore information on available pre-programmed Garmin data cards and otherMapSource programs.NOTE: When networking with a Garmin GPSMAP 4000 or 5000 series unit,map data is not shared.Using the Map PointerUse the map pointer to pan away from your current location and scroll to othermap areas around the world (even outside of your current detail coverage). Asyou pan past the edge of the current map display, the screen actively scrollsforward to provide continuous map coverage. An hourglass symbol appears bythe pointer while the unit is busy drawing new map detail.Controlled by the ROCKER, the map pointer is an important tool that can beused to pan to other map locations, mark and edit waypoints and routes, andreview location data of on-screen map items and waypoints.Map tem name, ponter coordnates,dstance, and bearngMapponterTo move the map pointer:Press the ROCKER to move the map pointer up, down, left, right, ordiagonally.