Canon imageRUNNER 1750i Facsimile Manual

Also see for imageRUNNER 1730i: Remote guide User guide Starter Guide User guide Client guide

Contents

Canon imageRUNNER 1750i Facsimile Manual Manual pdf 291 page image

Additional Functions Settings Table10-2Appendix10Additional Functions Settings TableThe tables below list the Address Book Settings, Communications Settings, andReport Settings that can be selected from the Additional Functions menu. Somefunctions can be used only when the appropriate optional equipment is attached.■ Communications SettingsItem Settings ApplicablePageCommon SettingsTX SettingsUnit Name 24 characters maximum p. 1-11Data CompressionRatio High Ratio, Normal, Low Ratio p. 7-2Retry Times 0 to 5 times; 3 times p. 7-4Edit Standard SendSettings Store, Initialize p. 7-5TX Terminal IDOnPrinting Position: Inside, OutsideTelephone # Mark *1: FAX, TELOffp. 7-9Gamma Value for ColorSend JobsGamma 1.0, Gamma 1.4, Gamma 1.8, Gamma2.2 p. 7-13Sharpness*2 7 levels; 4 p. 7-14The default settings are indicated in bold.*1 Indicates items that are available only when the optional Super G3 Fax Board-AJ1 isattached to the machine.*2 The setting for [Sharpness] is invalid when all of the conditions below are met.- [100 × 100 dpi], [150 × 150 dpi], or [200 × 100 dpi] is selected as the resolution. (See“Specifying the Color Mode and Resolution,” on p. 3-2.)- [B&W] is selected as the color mode. (See “Specifying the Color Mode andResolution,” on p. 3-2.)- [Text] is selected as the image quality. (See “Adjusting the Density and Image Quality,”on p. 3-9.)To activate [Sharpness], change the settings.