Messages regarding HP-GL/2Messages regarding HP-GL/2This type of paper is not compatible with HP-GL/2. ........................................................................................ 656GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ....................................................................... 656GL2: W0502 The parameter is out of range. ................................................................................................... 656GL2: W0504 This command is not supported. ............................................................................................... 656This type of paper is not compatible with HP-GL/2.This type of paper is not compatible with HP-GL/2.Cause Corrective ActionThe printer has received a HP-GL/2 print jobthat cannot be printed on the paper that hasbeen advanced.Follow these steps to replace the type of paper in the printer.1. Press ▲ or ▼ to select Change Paper, and then press the OK button.2. Replace the paper with a type compatible with HP-GL/2. For details on papercompatible with HP-GL/2, refer to the Paper Reference Guide.(See "Displaying the Paper Reference Guide.") ➔ P.323Press ▲ or ▼ to select Stop Printing, and then press the OK button.Press ▲ or ▼ to select Print, and then press the OK button to resume printing. How-ever, note that this error may cause paper jams and affect the printing quality.GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)Cause Corrective ActionThe printer memory isfull.Because the entire print job could not be received, the printer may not be able to print the entire original.Check the printing results.In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printingresults because the image may be incomplete in some cases.GL2: W0502 The parameter is out of range.GL2: W0502 The parameter is out of range.Cause Corrective ActionA parameter specified in a HP-GL/2 command is out of the suppor-ted range.Check the print job.If you have specified ProcessingOption > Warning > On inthe Control Panel menu, set it to Off instead.GL2: W0504 This command is not supported.GL2: W0504 This command is not supported.Cause Corrective ActionThe printer has received an unsupported HP-GL/2 com-mand.Check the print job.If you have specified ProcessingOption > Warning > On in theControl Panel menu, set it to Off instead.This type of paper is not compatible with HP-GL/2. iPF830User's GuideError Message Messages regarding HP-GL/2656
