Paper jam.Paper jam."Lift the release lever."Cause Corrective ActionA paper jam occurredin the printer duringprinting.1. Lift the Release Lever and remove the jammed paper.(See "Clearing Jammed Roll Paper.") ➔ P.607(See "Clearing a Jammed Sheet.") ➔ P.6102. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press theOK button.Printing will resume, starting from the page on which the error occurred."Manually rewind the roll all the way and press OK."Cause Corrective ActionA paper jam occurredwhen advancing the pa-per.1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, pressthe OK button.Printing will resume, starting from the page on which the error occurred."Lift the release lever and remove the paper."Cause Corrective ActionA paper jam occurred in the printer during printing. Lift the Release Lever and remove the jammed paper.(See "Clearing Jammed Roll Paper.") ➔ P.607(See "Clearing a Jammed Sheet.") ➔ P.610Paper loaded askew.Paper loaded askew.Cause Corrective ActionPaper loaded crooked was detected when the paper was advanced. Lift up the Release Lever and reload thepaper.(See "Loading Rolls in the Print-er.") ➔ P.333(See "Loading Sheets in the Print-er.") ➔ P.353If this error recurs after you reload the roll,remove the Roll Holder from the printer,push the roll firmly in until it touches theRoll Holder flange, and reload the RollHolder in the printer.(See "Attaching the Roll Holder toRolls.") ➔ P.330Important• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loosein the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems becausepaper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the nextdocument when it is printed.Paper cutting failed.Paper cutting failed.Cause Corrective ActionThere are sheets left on theEjection Guide. 1. Lift the Release Lever and remove the paper.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,press the OK button.Printing will resume, starting from the page on which the error occurred.iPF830 Paper jam.User's GuideError Message Messages regarding paper645
