Setting DetailsCrop Marks You can print with the crop marks.Page Options Dialog BoxPage Options Dialog BoxThis dialog box appears when you select Page Options from the File menu. This allows you to configure the rollpaper length, object layout order, and margins of Free Layout.• Roll Paper LengthSet the length of one page to print on roll paper.The following settings are available for roll paper length.Setting DetailsAuto Settings The one-page length to be printed on roll paper is automatically set so that the laid-outobjects are printed on one page.Manual Settings You can input the length of one page to print on roll paper in numerical characters.Note• Available only if rolls are selected in Paper Source.• You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).• You can change the numbers by clicking either ▲ button or ▼ button.• OrderSet the object layout order.The following settings are available for order.Setting DetailsUpper Left to Right The objects are laid out from upper left to right.Upper Left to Bottom The objects are laid out from upper left to bottom.Upper Right to Left The objects are laid out from upper right to left.Lower Left to Top The objects are laid out from lower left to top.Note• When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Vertical, you canchoose Upper Left to Right or Upper Right to Left.• When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Horizontal, you canchoose Upper Left to Bottom or Lower Left to Top.iPF830 Page Options Dialog BoxUser's GuideWindows Software Free Layout191
