Note• To display the Paper Information on Printer dialog box, on the Main sheet, click Get Information by Media Type.(See "Main Sheet .") ➔ P.154• A Paper SourceShows the paper source supported by the printer, as well as information about the loaded paper. To update thepaper source and media type settings in the printer driver, select the desired Paper Source option and clickOK.Paper Detailed Settings Dialog BoxPaper Detailed Settings Dialog BoxIn the Paper Detailed Settings dialog box, you can set Drying Time for the paper selected with Media Type of theMain sheet, etc.You can display this dialog box by clicking Advanced Settings of Media Type on the Main sheet. (See "MainSheet .") ➔P.154As for the items for which you can select Printer Default in this dialog box, you also can set them from the controlpanel of the printer. (See "Menu Settings.") ➔P.442A Drying TimeSpecify the time that the printer waits for ink to dry, as needed. The Between Pages setting is only valid for rolls.• B Between PagesYou can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is re-quired for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even ifCutting Mode is set to Automatic.Setting Item DetailsPrinter Default The setting of the control panel of the printer is applied.Off Paper is ejected immediately after printing completes.30 sec. / 1 min. / 3 min. / 5 min. /10 min. / 30 min. / 60 min.Paper is ejected when the set time elapses after printing completes.• C Between ScansYou can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleedingor color unevenness such as when bleeding occurs on a page or when color unevenness occurs during bor-derless printing.Setting Item DetailsPrinter Default The setting of the control panel of the printer is applied.Off The next line is printed immediately after a line is printed.1 sec. / 3 sec. / 5 sec. / 7 sec. / 9sec.The next line is printed when the set time elapses after a line is printed.* Increase the time according to the occurrence condition of bleeding or unevenness.Paper Detailed Settings Dialog Box iPF830User's GuideWindows Software Printer Driver158
