Line thickness is not uniformLine thickness is not uniformCause Corrective ActionIn the Special Settings dialog box ofthe Windows printer driver, FastGraphic Process is set to On.Access the printer driver Properties dialog box from Print in the File menu of the sourceapplication, and follow these steps to print.1. Clear the option Open Preview When Print Job Starts on the Main sheet.2. Clear the option Page Layout on the Layout sheet.3. Click the Special Settings button in the Layout sheet, open the Special Settings dia-log box, and set Fast Graphic Process to Off.The type of paper specified in theprinter driver does not match the typeloaded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") ➔ P.333(See "Loading Sheets in the Printer.") ➔ P.353Make sure the same type of paper is specified in the printer driver as you have loaded inthe printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.The blue Switch on the platen is setincorrectly.Move the Switch numbered corresponding to the size of paper for printing opposite to the ●position.(See "Setting the Blue Switch on the Platen.") ➔ P.623Lines are misalignedLines are misalignedCause Corrective ActionThe Printhead alignment is not adjus-ted.Adjust the Printhead alignment.(See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.550(See "Manual Adjustment to Straighten Lines and Colors.") ➔ P.552(See "Adjusting Line Misalignment.") ➔ P.554The type of paper specified in the print-er driver does not match the type loa-ded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") ➔ P.333(See "Loading Sheets in the Printer.") ➔ P.353Make sure the same type of paper is specified in the printer driver as you have loaded inthe printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.iPF830 Line thickness is not uniformUser's GuideTroubleshooting Problems with the printing quality627
