Important• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed docu-ments may not be dropped into the Output Stacker, and the printed surface may become soiled.• The Output Stacker can accommodate one sheet. When printing multiple pages, remove each sheet after it isprinted.• Before using the Output Stacker, remove the Rewind Spool. If you do not, it may prevent printed documents frombeing held correctly, and they may be scratched.• The Output Stacker can hold printed documents from rolls that are 62 inches (1,575 mm) long. When printinglonger documents, use the optional Media Take-up Unit.The Output Stacker locks into position if you lift it to position (1) or (2). To lower the Output Stacker, lift the frontBasket Rod lightly to release the lock, and then lower the stacker.Stowing the Stationary Output StackerStowing the Stationary Output StackerStow the Stationary Output Stacker if you will use the Media Take-up Unit or if you will not use the Stationary Out-put Stacker for an extended period.1 When the Output Stacker is in the position used when storingprinted documents (a), lift the front Basket Rod gently to re-lease the lock, lower the stacker toward the front (b), and pushit all the way back.abStowing the Stationary Output Stacker iPF830User's GuideHandling and Use of Paper Output Stacker360
